Table of Contents
Advertisement
2 It can be used with various fittings, eg the
angled nozzle and small and large brush
attachments, depending on the task.
• The jet nozzle can be used with various
fittings for cleaning inaccessible areas
such as corners, joints, blinds, radiators
and toilets as well as various surfaces
such as stainless steel, windows, mirrors,
enamelled surfaces and also for stain
removal.
Brush attachments
1 Choose the desired attachment for the
task Q.
2 Fit the brush attachment onto the jet
nozzle by pushing on.
3 Pull to remove.
IMPORTANT: Always test a hidden area
before using steam on any surface.
Upholstery attachment
1 Fit the rectangular upholstery steam
nozzle to the jet nozzle adaptor by
pushing on and turning clockwise to
lock R.
2 This nozzle can be used with or without
the cotton cover Î.
8
Ó
Í
Q
R
3 Turn anti-clockwise and pull to remove.
• This nozzle is ideal for cleaning cushions,
carpets and car seats.
IMPORTANT: Always test on a hidden
area before you start. Steam cleaning may
not be suitable for certain fabrics such as
dralon due to the high temperature of the
steam.
Window squeegee attachment
1 Locate the window squeegee onto the
two tabs at the bottom of the upholstery
nozzle. Then push the top of the
squeegee until the clip goes over the top
of the upholstery nozzle S.
• This attachment is ideal for cleaning
windows, mirrors, ceramic tiles and other
non porous smooth surfaces.
• Apply the steam evenly to the glass
surface from a distance of 10-15 cm.
Then switch the steam off and wipe the
moisture off the glass from top to bottom
using the rubber squeegee. Wipe the
rubber squeegee and the lower edge of
the window. Dry after every strip.
IMPORTANT: Glass surfaces can be
shattered by the sudden application of
excessive heat. Warm glass surfaces first
Ï
S
T
Advertisement
Table of Contents
