Table of Contents
Advertisement
Floor nozzle
Ú
The floor nozzle is used for the cleaning
of large, washable walls and floor areas. The
floor nozzle can be used with or without the
cotton towel Û.
• Sensitive surfaces, wood, linoleum etc.
should be used with the cloth.
1 Fit the elbow attachment Ò to the floor
nozzle and twist 1/2 a turn L.
2 Fit the floor nozzle to the extension tube
or handle M.
3 To fit the cloth to the floor nozzle pull the
cloth under the clips on both sides. Extra
cloths can be ordered through our
helpline. Alternatively any strong,
uncoloured cotton cloths may be
used N.
• The cleaning power of the cloth can be
optimised by turning and changing the
cleaning cloth regularly.
• To clean very dirty areas, move the
cleaning nozzle over the surface more
slowly in order to increase the cleaning
action of the steam.
IMPORTANT: The cleaner is not suitable
for cleaning unsealed wooden floors,
laminates, soft plastics or wooden furniture.
If in doubt check with the flooring
manufacturer.
Accessory adaptor
1 Push the jet nozzle adaptor
will go onto the connection nozzle until
you hear it click into place O.
2 The jet nozzle adaptor can be removed
again by pressing the accessory
connection button to release it.
Jet nozzle
1 Push the jet nozzle directly onto the jet
nozzle adaptor and turn in a clockwise
direction to lock into place P.
L
M
Ô
as far as it
N
O
P
7
Advertisement
Table of Contents
