Advertisement
Quick Links
WAND
Measuring Forehead Temperatures
1
Power on device
Point at center of forehead
2
less than 3 inches away
Press the SCAN button for
1 second—two short beeps
3
tells you it's done
WAND Clinical is pre-set to forehead mode and to display temperature in
Fahrenheit. Three short beeps followed by one long beep while taking a forehead
reading means that the temperature exceeded 99.5°F (37.5°C). Check Zone
Indicator for more information. Please wait 2 seconds between measurements.
For warranty, service, and technical assistance, please contact ThermoWorks' Technical
Support at (385) 330-0591 or email techsupport@thermoworks.com.
www.thermoworks.com/wand-clinical | 801-756-7705
ThermoWorks
Quick Reference
Quick, Easy, and Reliable!
Technical Support
Clinical
™
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for ThermoWorks WAND Clinical
Summary of Contents for ThermoWorks WAND Clinical
- Page 1 1 second—two short beeps tells you it’s done WAND Clinical is pre-set to forehead mode and to display temperature in Fahrenheit. Three short beeps followed by one long beep while taking a forehead reading means that the temperature exceeded 99.5°F (37.5°C). Check Zone Indicator for more information.
- Page 2 Cautions • Forehead should be clean, dry, and unobstructed before taking readings. • WAND Clinical is not waterproof. Avoid wet areas and splashes. • Do not expose device to temperatures above 100°F (38°C) or below 50°F (10°C).
Need help?
Do you have a question about the WAND Clinical and is the answer not in the manual?
Questions and answers