Summary of Contents for ThermoWorks Therma 20 Plus
Page 1
Therma 20 Plus Therma 22 Plus ThermaCheck Plus Operating Instructions...
Page 2
INSTRUMENT OPERATION - Where applicable (Therma 20 Plus and Therma 22 Plus) connect a probe via the socket located at the top of the instrument, screw in the collar of the plug, finger tight, to ensure a secure connection (do not over tighten). Switch the instrument on and apply the tip of the probe to the substance or medium to be measured.
Page 3
During this period, products that prove to be defective will, at the discretion of ThermoWorks, be either repaired or replaced without charge. This warranty does not apply to probes, where a six-month period is offered.
Page 4
INSTRUMENT RECORD CARD Model Order Code Therma 20 Plus 232-040 Therma 22 Plus 232-041 ThermaCheck Plus 232-042 CALIBRATION 32°F ( 0°C ) 212°F ( 100°C ) Thermocouple Thermistor Serial no. _____________________________________ Calibrated by __________________ Date ____________ This instrument has been checked or calibrated against reference instrument(s) calibrated by a UKAS Accredited Calibration Laboratory.