Contents Before Use Tuner Precautions ..............4 Tuner Basic Operation ..........23 How to read this manual ......... 5 Memory Operation ..........24 Selecting Operation ..........24 Basic Operations Traffic Information ...........25 Tuner Setup ..............25 Functions of the Buttons on the Front Panel ... 6 Turning on the Unit ...........
Page 3
Setting Up Monitor Screen Setup ..........40 System Setup .............40 User Interface Setup ..........41 Special Setup .............42 Display Setup .............42 AV Setup ..............43 Connection Setup ............44 Controlling Audio Speaker/ X’over setup ..........46 Controlling General Audio ........47 Equalizer Control ............48 Volume Offset ............49 Sound Effect ...............49 Listening Position/ DTA ..........50 Remote control...
• When you purchase optional accessories, with the USB device connected can damage check with your JVC dealer to make sure that the data stored in the USB device. For how to they work with your model and in your area.
Basic Operations Basic Operations Functions of the Buttons on Name the Front Panel • Motion [+], [−] (Volume) • Adjusts volume. The volume will go up until 15 when you keep pressing +. Remote Sensor • Receives the remote control signal. Reset •...
Basic Operations Getting Started Touch [Finish]. Initial setup Perform this setup when you use this unit first time. Set each item as follows. NOTE • These settings can be set from the SETUP menu. See Setting Up (P.40). Calendar/clock settings Press the [FNC] button.
Basic Operations Adjusting the volume Set each item as follows. Scroll the page to show hidden items. To adjust the volume (0 to 40), Press [+] to increase, and press [−] to decrease. Holding [+] increases the volume continuously to level 15. [Time Format] ■...
Basic Operations Display the HOME screen Gesture Touch Control: You can also control playback by moving your finger on the touch panel as follows (for some Press the [ ] button. sources, the gesture control is not available). • Sliding the finger towards up/down: - Functions same as pressing [ ] / [ ] (Media)
Page 10
Basic Operations Select the playback source To select the playback source on the HOME screen Touch [ ] on the HOME screen. From the screen, you can select the following sources and functions. • Switches to the Digital Radio broadcast. (P.26) •...
Basic Operations Customize Short-cut buttons on The color of the lower circle indicates the HOME screen reckoning status. The lower circle blinks red during measurement and turns green when You can arrange the position of the source icons measurement is completed. as you like.
Basic Operations Popup menu List screen There are some common function keys in the Press the [FNC] button. list screens of most sources. h Popup menu appears. The contents of the menu are as follows. • Displays the Screen Adjust screen. (P.40) •...
APPS APPS Ñ Apple CarPlay Operation Preparation Wired connection Apple CarPlay is a smarter, safer way to use your iPhone in the car. Apple CarPlay takes the things Connect your iPhone with the USB cable you want to do with iPhone while driving and that matches the connector.
Page 14
APPS Ñ Ñ Operation buttons and Use Siri available Apps on the home You can activate Siri. screen of Apple CarPlay Press the [ ] button. You can use the Apps of the connected iPhone. The items displayed and the language used on the screen differ among the connected devices.
APPS Ñ Android Auto™ Operation Operation buttons and available Apps on the Android Auto screen Android Auto enables you to use functions of your Android smartphone convenient You can perform the operations of the Apps of for driving. You can easily access route the connected Android smartphone.
APPS Ñ Switch to the Android Auto Wireless Mirroring Operation screen while listening to for iPhone another source You can display and control the App on the unit Press and hold the [FNC] button. while your iPhone is connected via Bluetooth. To use Wireless Mirroring, follow the instructions on your iPhone.
APPS Ñ Ñ Connecting an iPhone Operation buttons Press the [FNC] button. Touch [ ] on the bottom left of the h Popup menu appears. screen. 10:00 100% Touch [ h The Device List screen appears. Touch [ Launch Mirroring App on your iPhone. Your iPhone will connect to the unit's Wi-Fi.
APPS Ñ Wireless Mirroring Operation Connecting an Android smartphone for Android Smartphone Press the [FNC] button. You can display and control the App on the unit h Popup menu appears. while your Android smartphone is connected via Bluetooth. Touch [ To use Wireless Mirroring, follow the instructions h The Device List screen appears.
Page 19
APPS Ñ Operation buttons Touch [ ] on the bottom left of the screen. 10:00 h Operation menu appears. 10:00 Wireless Mirroring Works the same as the Back button on the Android smartphone. Works the same as the Home button on the Android smartphone.
Connecting a USB device USB Basic Operation Most functions can be controlled from the Connect the USB device with the USB source control screen and playback screen. cable. (P.57) Control screen Press the [ ] button. Touch [ Touch [USB]. (P.10) Ñ...
Page 21
] / [ Hide (Video file only) • [ ] : Repeats the current track/folder. Each • Touch to hide the operation keys. time you touch the key, repeat mode switches Video screen in the following sequence; File repeat ([ ]), Folder repeat ([ ]), Repeat all ([...
Ñ Search Operation Link search (Audio file only) You can search a file of same artist/album/genre You can search music or video files by the as the current track. following operations. Touch [Link Search]. Touch [1]. Touch the desired tag type. You can select Touch [S].
Tuner Tuner Tuner Basic Operation Operation keys • [E] [F] : Tunes in a station. The method of Most functions can be controlled from the frequency switching can be changed (see 2 source control screen. in table). To enter Tuner source, touch [Tuner] icon in the •...
Tuner Selecting Operation • [RDS]: Indicates the state of the Radio Data System station when the AF function is on. Ñ White: Radio Data System is being received. Preset select Orange: Radio Data System is not being You can list and select memorized station. received.
Tuner Traffic Information (FM only) Tuner Setup (FM only) You can listen and watch the traffic information You can set tuner related parameters. automatically when a traffic bulletin starts. Touch [ However, this feature requires a Radio Data System that includes the TI information. Touch [ ] on the left side of the screen.
Digital Radio Digital Radio Digital Radio Basic Operation Seek mode Switches the seek mode in the following Most functions can be controlled from the sequence; [AUTO1], [AUTO2], [MANUAL]. source control screen. • [AUTO1]: Tunes in a ensemble with good To enter Digital Radio source, touch reception automatically.
Digital Radio Selecting Operation Preset list • Touch [ ] / [ ] allows you to change the Ñ display size. Search by program type • Recalls the memorized service. You can tune to a station with a specific • When touched for 2 seconds, stores the program type when listening to Digital Radio.
Digital Radio Ñ Service search Traffic Information You can select a service from a list of all services You can listen and watch the traffic information received. automatically when a traffic bulletin starts. Touch [1]. However, this feature requires a Digital Radio that includes the TI information.
Digital Radio Ñ Digital Radio Setup Announcement setup When the service for which “ON” is You can set Digital Radio related parameters. selected starts, switches from any source to Announcement to receive it. Touch [ ] on the left side of the screen. Touch [SETUP].
Bluetooth Control Bluetooth Control Ñ About the cell-phone and Using the Bluetooth function, various functions Bluetooth audio player can be used: listening to the audio file, making/ receiving a call. This unit conforms to the following Bluetooth specifications: Information for using Bluetooth®...
Bluetooth Control Register the Bluetooth device Connection Setup It is necessary to register the Bluetooth audio Press the [FNC] button. player or cell-phone to this unit before using the h Popup menu screen appears. Bluetooth function. You can register up to 7 Bluetooth devices. Touch [ NOTE •...
Page 32
Bluetooth Control Ñ Switch the connected device To delete the registered Bluetooth device If two or more Bluetooth devices have been registered, select the device to be used. Touch [ ] on the Device List screen. Touch [Device List] on the Connection Setup screen.
Bluetooth Control Playing Bluetooth Audio Play mode indicator/ Playing time Device • Touch [ ] / [ ] allows you to hide/display the artwork area. Most function can be controlled from the • [D], [H]: Current play mode indicator source control screen. The meanings of each icon are as follows;...
Bluetooth Control Using Hands-Free Unit ● Device List 1) Touch [ Device List screen appears. You can use telephone function by connecting the Bluetooth telephone to this unit. NOTE NOTE • The status icons such as battery and antenna are displayed for each connected cell-phone.
Bluetooth Control Ñ Voice Recognition Call using the preset number You can access the voice recognition function of Touch [ the cell-phone connected to this unit. You can search the cell-phone phonebook by voice. (The Touch the Name or phone number. functionality depends on the cell-phone.) Press the [ ] button.
Bluetooth Control Ñ Operations during a call ● When you receive a call from another connected device during a call Touch [ ] to end the current call and answer a new call. Touch [ ] to end the new call and continue the current call.
Bluetooth Control Hands-Free Setup [Add number direct] ■ Enter the telephone number directly and touch [SET]. See Call by entering a phone You can make various settings for the Hands- number (P.34). Free function. ■ [Delete] Press the [FNC] button. To delete a preset number, touch [Delete] h Popup menu appears.
Other External Components Other External Components Ñ Camera Setup View Camera Press the [FNC] button. # CAUTION h Popup menu appears. The position of parking guidelines displayed on the monitor may differ from actual condition. Touch [ Please take the actual parking guidelines as h SETUP Menu screen appears.
Page 39
Other External Components To adjust the parking guidelines NOTE • Install the rear view camera in the appropriate position according to the instructions supplied with the rear view camera. • When adjusting the parking guidelines, make sure to use the parking brake to prevent the car from moving.
Setting Up Setting Up Monitor Screen Setup System Setup You can adjust image quality in video screen. Press the [FNC] button. Press the [FNC] button. h Popup menu appears. h Popup menu appears. Touch [ Touch [ h Screen Control screen appears. Adjust each item as follows.
Setting Up Ñ User Interface Setup Learning function of steering remote You can setup user interface parameters. This function is available only when your vehicle is equipped with the electrical steering remote Press the [FNC] button. controller. h Popup menu appears. If your steering remote controller is not compliant, learning may not be completed and Touch [...
Setting Up Special Setup Display Setup You can setup Special parameters. Press the [FNC] button. Press the [FNC] button. h Popup menu appears. h Popup menu appears. Touch [ Touch [ h SETUP screen appears. h SETUP screen appears. Touch [Display]. Touch [Special].
Setting Up AV Setup To register original image You can load an image from the connected USB device and set it for the wallpaper image. You can set AV parameters. Before operating this procedure, it is necessary to Press the [FNC] button. connect the device which has the image to load.
Setting Up Connection Setup [Phone Calling/Talking Volume] ■ Adjust the level of phone calling/talking volume. Default is “15” Press the [FNC] button. [Speech Quality Adjust] ■ h Popup menu appears. Adjust the speech quality. [Microphone Level] : Adjust the level of Touch [ microphone gain.
Page 45
Setting Up Ñ Change the device name for Bluetooth Touch [Device Name] on the Connection screen. h Change Device Name screen appears. Touch [ Input the device name. Touch [Enter]. English...
Controlling Audio Controlling Audio Speaker/ X’over setup You can adjust the various settings such as audio balance or subwoofer level. Press the [FNC] button. Press the [FNC] button. h Popup menu appears. h Popup menu appears. Touch [ Touch [ h Audio screen appears.
Controlling Audio [Tweeter] (Only for Front) [TW] (Tweeter) [Gain]* ■ ■ You can set the tweeter when you are Adjusts the tweeter level. (When front is selecting front speakers. selected on Speaker Select screen) [None], [Small], [Medium], [Large] [Phase Inversion]* ■...
Controlling Audio Equalizer Control [SW Level] ■ Adjusts the subwoofer volume. You can adjust equalizer by selecting the Ñ Recall the EQ curve optimized setting for each category. Press the [FNC] button. Touch [Preset Select]. h Popup menu appears. Select EQ curve. Touch [ h Audio screen appears.
Controlling Audio Volume Offset Sound Effect Finely adjust the volume of the current source You can set sound effects. to minimize the difference in volume between Press the [FNC] button. different sources. h Popup menu appears. Press the [FNC] button. h Popup menu appears.
Controlling Audio Listening Position/ DTA Position DTA control You can fine-adjust your listening position. Adjust the sound delay time as nearer speakers Touch [Adjust]. to the selected seat have more delay time, so that the sound from each speaker arrive a Touch [Delay].
Remote control Remote control This unit can be operated using the remote Functions of the Remote control RM-RK259 (optional accessory). control Buttons Ñ Changing the battery of the remote control unit • Use a commercially Keep on slide available button battery (CR2025).
Page 52
Remote control Function Name Numeric Specifies the number to search in Keypad direct search. For details on the direct search mode, see Direct search mode (P.52). Deletes a character while in direct [CLR] search mode. Performs the selected function. [ENT] Ñ...
Connection/Installation Connection/Installation This section is for the professional installer. • If the power is not turned ON (“There is an For safety’s sake, leave wiring and mounting error in the speaker wiring. Please check to professionals. Consult the car audio dealer. the connections.”...
Connection/Installation Installing the unit • Reception may drop if there are metal objects near the Bluetooth antenna. Ñ Mounting sleeve Bend the tabs of the mounting sleeve with Bluetooth antenna unit a screwdriver or similar Ñ utensil and attach it in Supplied accessories for place.
Connection/Installation Ñ Ñ 1DIN install GPS antenna (without mounting sleeve) GPS antenna is installed inside of the car. It You can install the unit in a 1DIN size space by should be installed as horizontally as possible to removing the right, left, and rear brackets. allow easy reception of the GPS satellite signals.
Connection/Installation Ñ Removing the trim plate 4) Pull out the unit halfway. 1) Insert the extraction key (accessory 4) between the trim plate and the main unit from between the claws. NOTE • Be careful to avoid injury from the catch pins 2) Pull the plate out towards yourself.
Connection/Installation Ñ Connecting wires to terminals Subwoofer Preout (Blue) Visual Output (Yellow) SUB-W V-OUT CAM IN Rear view camera input (Yellow) Rear Audio Preout (Left; White, Right; Red) Front Audio Preout (Left; White, Right; Red) Fuse (15A) SUB-W V-OUT CAM IN USB terminal (1.0 m) 2.1A...
Page 58
(Power control/Antenna control wire) P. CONT ANT. CONT Connect to vehicle’s steering remote harness. Connect either to the power control Contact your JVC dealer for details. terminal when using the optional power amplifier, or to the power ST REMOTE Green/Red...
Page 59
USB maximum power supply current : • Make sure that the pin assignment of the DC 5 V = 2.1 A connector matches with the JVC unit. Sold separately • Take extra notice of the power wire. • In case battery wire and ignition wire are not corresponding then change them accordingly.
Troubleshooting Troubleshooting Problems and Solutions Error Messages If any trouble occurs, first check the following When you fail to operate the unit correctly, the table for possible problems. cause of the failure appears as the message on the screen. NOTE [No Device] (USB device) •...
Appendix Appendix Playable Media and Files You can play various kinds of media and files on this unit. Ñ About files The following audio and video files are supported. ■ Playable Audio files Format Bit rate Sampling frequency Bit count AAC-LC (.m4a) MPEG2/4 AAC LC 8 –...
Appendix About this Unit PERSONAL AND NON-COMMERCIAL ACTIVITY AND/ OR WAS OBTAINED FROM A VIDEO PROVIDER LICENSED TO PROVIDE VC-1 VIDEO. NO LICENSE IS GRANTED OR ■ Copyrights SHALL BE IMPLIED FOR ANY OTHER USE. ADDITIONAL INFORMATION MAY BE OBTAINED FROM MPEG LA, L.L.C. •...
Page 65
Appendix ■ Information on Disposal of Old DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT Electrical and Electronic Equipment LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS and Batteries (applicable for EU OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR countries that have adopted separate BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,...
Page 66
érhető Declaration of Conformity with regard to the Hrvatski RE Directive 2014/53/EU JVCKENWOOD ovim izjavljuje da je radio oprema KW-M695DBW u Declaration of Conformity with regard to the skladu s Direktivom 2014/53/EU. Cjeloviti tekst deklaracije Europske RoHS Directive 2011/65/EU unije o usklađenosti dostupan je na sljedećoj internet adresi:...
Page 67
First Floor, Gleneagles, the Belfry, Colonial Way, С настоящото JVCKENWOOD декларира, че радиооборудването Watford, Hertfordshire WD24 4WH, UNITED на KW-M695DBW е в съответствие с Директива 2014/53/ЕС. KINGDOM Пълният текст на ЕС декларацията за съответствие е достъпен на следния интернет адрес: Hereby, JVCKENWOOD declares that the radio equipment “KW-M695DBW”...
Page 68
Important Notice on Software EULA Ñ Ñ Software License on This Product Software License Agreement The software embedded in this product comprises a JVCKENWOOD Corporation (hereinafter called number of independent software components, each “Licensor”) holds either the copyright to the of which is copyrighted by JVCKENWOOD Corporation embedded software or the right to sublicense it.
Page 69
Article 3 (Terms of License) Article 8 (Cancellation of the Agreement) 1. In assigning this product, User may not retain Licensor reserves the right to cancel this agreement the original copy of the embedded Licensed forthwith and claim compensation from User for the Software (including associated literature, updates damages caused by such cancellation when User: and upgrades) and any duplicates and associated...
Need help?
Do you have a question about the KW-M695DBW and is the answer not in the manual?
Questions and answers