Operating Controls; Operating The Blender - Morphy Richards BLENDER - MANUAL 3 Manual

Operating controls

Operating controls
Operating controls Operating controls Operating controls
The blender control switch has the following
settings. Pulse, off, speed 1 and speed 2.
Off
P
The speed can be adjusted whilst the blender
is in use.
Using the pulse setting allows greater control
over the texture of the food produced. It is only
intended to be used for short 'bursts' of blending.

Operating the blender

Operating the blender Operating the blender
Operating the blender Operating the blender
Setting up
1 Ensure the blender base unit
from the mains.
2 Place the blade assembly
the glass jug and push into position.
3 Screw the jug base
glass jug .
BLENDER
Speed 1
Speed 2
is unplugged
into the centre of
anti-clockwise onto the
4
4 Place the blender jug
and turn. Ensure that the jug is securely in
place.
5 Place the food in the blender. (Please see
page 5 for hints on blending food.)
6 Place the lid onto the blender. Then put the
filler cap into position.
7 Plug in the blender and turn the control switch
to either pulse, speed 1 or speed 2
depending on the desired consistency. Always
operate the blender with the lid in place.
8 Never operate the blender with more than
3
1 litre (1 / pints) of liquid or when empty.
4
4
13/8/02, 12:26 PM
on to the base unit