Operating Controls; Operating The Blender - Morphy Richards PROFESSIONAL BLENDER AND MILL - REV 1 Manual

48493 Rev 1 2/3/04

Operating controls

The blender control
switch has the following
settings. Pulse, off, speed
1 and speed 2.
The speed can be
adjusted whilst the
blender is in use.
Using the pulse setting allows greater
control over the texture of the food
produced. It is only intended to be used for
short 'bursts' of blending.

Operating the blender

1 Ensure the blender base unit fl is
unplugged from the mains.
A
B
12:42 PM Page 4
2 Place the blade assembly › into the
centre of the glass jug ‹ and push into
position. A
3 Screw the jug base fi onto the glass jug.
Ensure that the jug base is securely in
place. B
4 Place the blender jug onto the base unit
fl. Ensure that the jug base is securely in
place. C
5 Place the food in the blender. (Please see
page 6 for hints on blending food).
6 Place the lid ¤ onto the blender. Then
put the filler cap ⁄ into position. D
7 Plug in the blender and turn the control
switch to either pulse, speed 1 or speed
2 depending on the desired consistency.
Always operate the blender with the lid in
place.
8 Never operate the blender with more than
1 litre (1 3 / pints) of liquid or when empty.
4
C
D
4