Morphy Richards LATITUDE AND FOOD FUSION BLENDER Instructions Manual

FP48953MUK Rev2 5/6/08
Operating Chart
Blending/liquidising
*Soups, purees,
drinks, milkshakes,
batters
Crushing ice
Ice
Do not process for longer than recommended time.
Do not exceed recommended maximum volumes.
* Do not add hot liquids to the glass jug, allow to cool first.
HINTS AND TIPS
Use your blender for
soups, sauces, drinks,
pates, mayonnaise,
dressing etc.
• Do not put dry ingredients
into the blender before
switching on. If necessary
cut them into pieces,
remove the filler cap, then
with the machine running
drop the pieces through
one by one.
Never run the blender
with dry ingredients for
longer than 15 seconds.
Allow to cool for 5
minutes.
• When making mayonnaise,
put all the ingredients
except oil, into the blender.
Then with the machine
running pour the oil slowly
into the blender through
the filler cap hole.
• Thick mixture, eg. pates
and dips, may require
scraping out with the
spatula. Ensure the
appliance is switched
off first. If the mixture is
difficult to process add
more liquid.
• When blending, pour the
liquids in first and then add
the solid food. Begin
blending at the lower
speed and increase when
needed.
U U K K H H e e l l p p l l i i n n e e 0 0 8 8 4 4 4 4 8 8 7 7 1 1 0 0 9 9 5 5 0 0
5
09:18 Page 1
Volume Speed Time
1.0 lt 1-4+ 15 secs
pulse 1 min
500ml pulse 10-20 secs
max
IMPORTANT: To ensure the
long life of your blender,
never run it for longer than
60 seconds and allow to
cool for 5 minutes. Switch
off as soon as you have
reached the desired
consistency.
• The machine will not work
if the blender jug is fitted
incorrectly.
• Don't use the blender jug
as a storage container.
Keep it empty when not in
use.
• Never blend more than 1
litre (1 / pints) - less for
3
4
frothy liquids, such as milk
shakes.
CLEANING AND
STORAGE
Before cleaning and
maintenance, switch the
appliance off and unplug it.
After use, fill the glass jug
with warm water, 1 litre (1
pints) and run for 30
seconds on the pulse
setting and repeat as
necessary. Never use
abrasives or cream
cleaners.
Clean the blender base unit
with a damp cloth or
kitchen paper roll.
There is a facility to wrap
your power cable around
the base of the product and
fit the plug into the plug
holder.
R R e e p p l l a a c c e e m m e e n n t t P P a a r r t t s s 0 0 8 8 4 4 4 4 8 8 7 7 3 3 0 0 7 7 1 1 6 6
Hints
Begin with low
speed and increase
to high if required.
Reassemble the jug by
carefully placing the glass
jug on the base unit,
ensuring it fits correctly.
WARNING : Never
immerse the blender
base unit in water.
WARNING: If any liquid is
spilt in the top of the
blender base unit,
switch off and unplug
from the socket and dry
with a cloth.
HELPLINE
If you have any difficulty
with your appliance, do not
hesitate to call. We are
more likely to be able to
help than the store where
you bought it.
Please have the following
information ready to enable
our staff to deal with your
enquiry quickly:
/ • Name of the product
3
4
• Model number as shown
on the underside of the
appliance or rating plate
• Serial number
UK Helpline
0844 871 0950
Replacement Parts
0844 873 0716
Ireland Helpline
1800 409 119
I I r r e e l l a a n n d d H H e e l l p p l l i i n n e e 1 1 8 8 0 0 0 0 4 4 0 0 9 9 1 1 1 1 9 9
1