Dell Precision NX046 User Manual page 57

5 Click Finish to delete the volume.
About Migrating to a RAID Configuration
Migration is only possible from a factory-installed RAID configuration, if
when you ordered your system it was configured for RAID and if you are
migrating between certain RAID configurations.
2-drive RAID 0
2-drive RAID 0
Not applicable
3-drive RAID 0
Not possible
2-drive RAID 1
RAID 1 to
RAID 0
migration
possible
3-drive RAID 5
Not possible
Migrating to a RAID Level 0 Configuration
1 Set your computer to RAID-enabled mode (see "Setting Your Computer to
RAID-Enabled Mode" on page 53).
2 Click the Start button and point to All Programs→ Intel(R) Matrix
Storage Manager→ Intel Matrix Storage Console to launch the Intel
Storage Utility.
If you do not see an Actions menu option, you have not yet set your
computer to RAID-enabled mode (see "Setting Your Computer to RAID-
Enabled Mode" on page 53).
3 On the Actions menu, select Create RAID Volume From Existing Hard
Drive to launch the Migration Wizard.
4 Click Next on the Migration Wizard screen.
5 Enter a RAID volume name or accept the default.
6 From the drop-down box, select RAID 0 as the RAID level.
3-drive RAID 0 2-drive RAID 1 3-drive RAID 5
2- to 3-drive Not possible
migration
possible
Not applicable Not possible
RAID 1 to Not applicable RAID 1 to RAID
RAID 0
migration
possible
Not possible Not possible
Not possible
Not possible
5 migration
possible
Not applicable
Advanced Features
57