Dell Precision NX046 User Manual page 185

1
7
1 tab
3 center cover latch
5 front alignment notch
7 rear alignment notch
NOTICE:
To avoid damage, ensure that the processor aligns properly with the
socket, and do not use excessive force when you install the processor.
10 Set the processor lightly in the socket and ensure that the processor is
positioned correctly.
11 When the processor is fully seated in the socket, close the processor
cover.
Ensure that the tab on the processor cover is positioned underneath the
center cover latch on the socket.
12 Pivot the socket release lever back toward the socket and snap it into
place to secure the processor.
5
6
2 processor socket
4 socket release lever
6 socket and processor pin-1 indicator
Adding and Replacing Parts
2
3
4
185