Advertisement
Quick Links
WFS37 • WFS50
WFS37 & WFS50
Water Fill Kits
Instruction Manual
INSTALLATION INSTRUCTIONS
FOR USE IN A SKIMMER
These WFS37 and WFS50 installation instructions are written for
installation in an EasyPro brand skimmer. These autofills will work
with other brands of skimmers however the installation instructions
could differ.
Advertisement
Related Manuals for EasyPro WFS37
Summary of Contents for EasyPro WFS37
- Page 1 Water Fill Kits Instruction Manual INSTALLATION INSTRUCTIONS FOR USE IN A SKIMMER These WFS37 and WFS50 installation instructions are written for installation in an EasyPro brand skimmer. These autofills will work with other brands of skimmers however the installation instructions could differ.
- Page 2 WFS37 — Install the autofill in the back wall of the skimmer by drilling a " hole 3" down from the top of the skimmer. The auto fill is usually located in the back wall of the skimmer in the pump chamber (see photo).
- Page 3 The auto fill box lets you mount your auto fill anywhere around the perimeter of the pond our pondless reservoir. WFS37 — The auto fill box comes with a pre-installed " bulkhead fitting in the end that the auto fill mounts to. You will need to install the PVC bushing into the bulkhead fitting and then install the auto fill into the bushing.
- Page 4 EasyPro shall not be held liable for any loss of fish, plants or any other livestock as a result of any failure or defect of this Product. This warranty gives you specific legal rights, and you may also have other rights that vary from State to State.
Need help?
Do you have a question about the WFS37 and is the answer not in the manual?
Questions and answers