EasyPro Spirit TLS1850 Instructions For Operation Manual

Pond & stream pump

Advertisement

TLS1850 • TLS2750 • TLS4250
Pond & Waterfall Pumps
Instructions for Operation • Safety • Warranty
Designed for minimal solids applications
Thank you for purchasing the Spirit Pond &
Stream pump from EasyPro. These pumps are
designed for continuous duty use in small ponds,
statuary, Just-A-Falls, etc. A great choice for
ponds with light debris laden water.
Can be run in vertical or horizontal positions
for compact applications
Oil-less design, fish and plant safe
Impeller designed for passing debris up to
/
" diameter
1
4
1
/
" female threaded outlet with a 1
1
4
1
/
" elbow included
1
2
Triple sealed 115v motors with 18 month warranty
Automatic overload and thermal protection with self reset
Run in vertical or horizontal position
/
" x
1
4

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Spirit TLS1850 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for EasyPro Spirit TLS1850

  • Page 1 Instructions for Operation • Safety • Warranty Designed for minimal solids applications Thank you for purchasing the Spirit Pond & Stream pump from EasyPro. These pumps are designed for continuous duty use in small ponds, statuary, Just-A-Falls, etc. A great choice for ponds with light debris laden water.
  • Page 2 10. Do not attempt to disassemble pump during the warranty period. If there are any questions please contact your local EasyPro dealer. 11. Never use an extension cord or tamper with power cord. Power cord cannot become bent, twisted, abraded or cut.
  • Page 3 Installation • Do not paint casing, over heating may occur • Lift only by handle, not by power cable or float switch • Do not hang pump in water, install on solid flat base in upright or horizontal position • Install proper outlet adapter for pipe or hose • Make sure that power cable plug and power outlet are away from water and water discharge pipe/hose. Operation Do not start operation with people standing near intake or outlet.
  • Page 4 Trouble Shooting Before taking any trouble shooting action, disconnect pump from the power supply. If there is any damage to the power cord or pump, repairs or replacements must be handled by EasyPro or a qualified party. Does not start • Make sure power cord is plugged in • Float (not included) may not be moving freely, increase depth Does not shut-off • Pump is not disabled by float (not included),...
  • Page 5 Specifications EasyPro TLS Pump Performance Capacity (GPM) TLS1850 TLS2750 TLS4250 Discharge 1 " fpt • Elbow 1 " fpt Voltage 115v, 60 hz • Power Cord 20' Part # Maximum Gph Watts Maximum Head TLS1850 1850 TLS2750 2750 TLS4250 4250...
  • Page 6 4385 East 110th abuse or negligence by the consumer. Grant, MI 49327 • An RMA number must be obtained by calling EasyPro Pond Products at Be sure to include RMA 800-448-3873 and be included on number, original receipt, package before returning for warranty.

This manual is also suitable for:

Spirit tls2750Spirit tls4250

Table of Contents