When turning off the display by detaching the power cord, wait 6 seconds before re-attaching the power cord for normal operation. • Ensure the use of an approved power cord provided by Philips at all times. If your power cord is missing, please contact your local service center. •...
Page 4
32BDL3751T Service: • The casing cover should be opened only by qualified service personnel. • If there is any need for repair or integration, please contact your local service center. • Do not leave your display under direct sunlight. If your display does not operate normally, having followed the instructions set out in this document, please contact a technician or your local service center.
32BDL3751T Federal Communications Commission (FCC) Notice (U.S. Only) NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
32BDL3751T FCC/ISED/CE-RED Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Operations in the 5GHz products are restricted to indoor usage only.
32BDL3751T Polish Center for Testing and Certification Notice The equipment should draw power from a socket with an attached protection circuit (a three-prong socket). All equipment that works together (computer, display, printer, and so on) should have the same power supply source. The phasing conductor of the room’s electrical installation should have a reserve short-circuit protection device in the form of a fuse with a nominal value no larger than 16 amperes (A).
32BDL3751T Information for U.K. only WARNING - THIS APPLIANCE MUST BE EARTHED. Important: This apparatus is supplied with an approved moulded 13A plug. To change a fuse in this type of plug proceed as follows:+ 1. Remove fuse cover and fuse. 2.
Page 10
Please find out about the local regulations on how to dispose of your old display from your local Philips dealer. (For customers in Canada and U.S.A.) This product may contain lead and/or mercury.
Page 11
For more information about E -waste please visit http://www.india.philips.com/about/sustainability/recycling/index.page and to know where you can drop off your waste equipment for recycling in India please contact on below given contact details.
32BDL3751T Unpacking and Installation 2.1. Unpacking • This product is packed in a carton, together with the standard accessories. • Any other optional accessories will be packed separately. • As this product is high and heavy, the operation of moving the device is recommended to be performed by two technicians. •...
Page 13
32BDL3751T • When removing the display from the box, leave the protective bag inside and take care not to touch the glass of the display to avoid any damage. PE Bag • Please keep the display upright when moving it. •...
Please verify that you received the following items with your package content: • LCD Display • Remote Control and AAA Batteries Interactive Display • Quick Start Guide 3000 Series 32BDL3751T • Power Cord • Touch USB • RS232 Cable Remote Control...
32BDL3751T 2.4. Mounting on a Wall To mount this display on a wall, a standard wall-mounting kit (commercially available) is required. It is recommended that you use a mounting interface that complied with TUV-GS and /or UL1678 standard in North America. Protective Sheet VESA Grid Table...
32BDL3751T 2.5. Mounting in Portrait Orientation This display can be installed in portrait orientation. Rotate the display 90 degrees counterclockwise. The “ ” logo should be on the right side when facing the display. NOTE: The working hour in portrait mode is 24 hours per day. 90°...
32BDL3751T Parts and Functions 3.1. Control Panel Remote control sensor and power status indicator ]button • Receive command signals from the remote control. Press this button to turn the display on or put it in standby mode. • Indicate the operating status of the display: [MUTE] button Light green when the display is turned On Press this button to mute or unmute the sound.
32BDL3751T 3.2. Input/Output Terminals MICRO USB RJ45 RS232 RS232 IR OUT IR IN USB-C USB-B AUDIO HDMI 1 IN HDMI 2 IN DP IN USB 3.0 USB 3.0 9 10 AC IN RS232 IN / RS232 OUT AC power input from the wall outlet. Android RS232 network input/output is reserved for customized protocol usage from System Integrator.
32BDL3751T 3.3. Inserting the Batteries in the Remote Control The remote control is powered by two 1.5V AAA batteries. To install or replace the batteries: 1. Press and then slide the cover to open it. 2. Insert the batteries with the correct polarity (+) and (–). 3.
32BDL3751T 3.6. Remote Control [ ] INFO button Show Information OSD. 3.6.1. General functions NAVIGATION buttons Root Menu: Go to the OSD of Smart picture. Main Menu: Move the selected item up to make adjustment. IR Daisy Chain Menu: Increase the controlled Group ID number.
32BDL3751T 3.6.2. ID Remote Control Press the [ID] button and the red LED blinks twice. 1. Press [ID SET] button for more than 1 second to enter the Set remote control ID number when using several displays. ID Mode. The red LED lights up. Press the [ID SET] button again will exit the ID Mode.
Page 22
3. When playing a video or music file, you can press button to pause playing. 4. All media files should be located in the folder of “philips”, under the root directory of the specified storage (internal/USB/SD Card). All sub-folders (video/photo/ music) are named by media types and shouldn’t be changed.
Page 23
32BDL3751T ] BACK button Return to the previous page or exit from the previous function. ] MUTE button Mute or unmute the sound. The button is only controlled by Scalar. [ ] [ ] [ ] [ ] COLOR buttons Hotkey to turn on and off backlight.
32BDL3751T 3.7. Open Frame Kit(Optional) • You can use the Open Frame Kit to mount the display to the frame of kiosk. • Please ask for the assistance of the professional to install the display with the Open Frame Kit. •...
32BDL3751T Connecting External Equipment 4.1. Connecting External Equipment (Multimedia Player) 4.1.1. Using HDMI video input HDMI IN Multimedia Player [HDMI IN] HDMI OUT 4.2. Connecting a PC 4.2.1. Using HDMI input HDMI IN [HDMI IN] HDMI OUT 4.2.2. Using DisplayPort input DisplayPort OUT [DisplayPort IN] DP IN...
32BDL3751T 4.2.3. Using HDMI input with USB-B (touch connector to PC) USB-B HDMI IN [USB-B] [USB] [HDMI IN] HDMI OUT 4.3. Connecting Audio Equipment 4.3.1. Connecting an external audio device AUDIO IN [AUDIO OUT] AUDIO OUT Stereo Ampli�er 4.4. Connecting Multiple Displays in a Daisy-Chain Configuration You can interconnect multiple displays to create a daisy-chain configuration for applications such as a menu board.
32BDL3751T 4.5. IR Connection External IR Receiver (optional) DISPLAY 1 DISPLAY 2 [IR IN] [IR IN] [IR OUT] DISPLAY 1 DISPLAY 2 [RS232 OUT] [RS232 IN] NOTE: 1. The remote control sensor of this display will stop working if the [IR IN] is connected. 2.
32BDL3751T 4.7. Touch Operation Zoom in This display is equipped with a touch-sensitive screen and Touch the target on the screen with two fingertips held supports the Windows Touch features either by single touch together and move them apart to zoom in (magnify) the or multi-touch operation.
Page 29
32BDL3751T The multi Touch function is not supported by Mac OS. The OS supported is listed below. Item Description Operating Systems Supported Windows 7, 8/8.1, 10,11 by Plug-and-Play Single Touch Multi Touch Windows 7, 8/8.1, 10,11 Mac OS before (include) 10.15 Mac OS after (include) 10.10 Chrome 38+ Supported Modes of...
32BDL3751T Operation Settings: go to Settings page. 1) Settings page: Note: The control button described in this section is mainly on the remote control unless specified otherwise. 5.1. Watch the Connected Video Source 1. Press the [ ] SOURCE button. 2.
Save: Save the schedule. 4. If an empty playlist is selected, the App will guide you through selecting the media source. All media files should be stored in /philips/ of root directory. For example, videos: {root dir of storage}/philips/video/...
Page 32
32BDL3751T 7-1 From the side menu bar, the following functions are 5. If you select “USB” storage, the App will guide you available: through selecting the USB device. - select all: select all storage files. - delete all: delete all playlist files. - add/remove: update playlist from source.
Page 33
Note: If the playlist contains video and music files, the screen becomes black when playing music file. Step 2. Copy “mpplaylistX.txt” to “philips” folder of internal storage. You may use SFTP to do this. File path : /storage/emulated/legacy/philips (for DL, PL) Ex.
32BDL3751T 5.5. Browser 4. Press “Option” and a list will appear on the left side. Import: Import the file of URL list Before using this feature, ensure that the system is connected Export: Export the file of URL list successfully to the network. Delete all: Delete all URL records from the main screen 1.
Page 35
32BDL3751T • A dialog box displays the path of the file to be saved as • Import the browser file and the URL will be listed on the well as the file name. Press the “Save” button to save the screen.
Page 36
32BDL3751T 7. Press “Settings” then enter the next page. b. If the enable checkbox is checked, you can set the reload time. 7.1 Incognito 7.3 Signage mode a. Enable : Display webpages using incognito mode. Enable going back to the Browser Compose page when the b.
Page 37
9. How to edit the URL list via SFTP Step 1. Create a text file of media player. File name: bookmarklist.txt. Content: Step 2. Copy bookmarklist.txt to “philips” folder of your internal storage. You may use SFTP to do this. File path: /storage/emulated/legacy/philips (for DL, Ex. /storage/emulated/legacy/philips/bookmarklist.txt Step 3.
4. If an empty playlist is selected, the App will guide you Every week: through selecting the media source. Set lifecycle. All media files should be stored in /philips/ of root directory. For example, pdfs : {root dir of storage}/philips/pdf/ 5.6.2. PDF Player introduction: 1.
Page 39
Step 1. Create a text file of PDF player. File name: pdfplaylistX.txt, “X” means playlist number(1,2,3,4,5,6,7). Ex. pdfplaylist1.txt, pdfplaylist2.txt Content: Step 2. Copy pdfplaylistX.txt to “philips” folder of the internal storage. You may use SFTP to do this. File path : /storage/emulated/legacy/philips (for DL, Ex. /storage/emulated/legacy/philips/pdfplaylist1.txt...
32BDL3751T Step 3. Add the PDF files to the “PDF” folder in the 5.7. Kiosk “philips” folder of your internal storage. Before using this feature, ensure that the system is connected Ex. /storage/emulated/legacy/philips/pdf/xxx.pdf successfully to the network. /storage/emulated/legacy/philips/pdf/yyy.pdf 1. Main page of “Kiosk” App which allows you to make /storage/emulated/legacy/philips/pdf/zzz.pdf...
Page 41
32BDL3751T 4. Press OK then URL records will be saved and go back to Import: Import URL list file home page. Export: Export URL list file Delete all: Delete all records of URLs in the URL list page. Back: Close the list from the left side. 6-1.
Page 42
32BDL3751T Import a file and the URL will be displayed on the list. The file name and path to be saved will be displayed. Press the “Save” button to save the URLs to the file. File format for import The file format should look like the example below, with C-1.
Page 43
32BDL3751T 7-2. Reload Allow users to set the webpage auto reload time. Reload time will reset and the countdown will restart if the user touches the screen. If the enable check box is unchecked, disable auto re- load. 7. Settings Press “Settings”...
Page 44
32BDL3751T Schedule 7-4. Signage mode Return to Kiosk home page while user is back from other Set OSD menu => Advanced option => Schedule => APK’s activity. With this option disabled, the kiosk screen will On time1, Off time2, Input is Kiosk, any day of the week, keep on the latest webpage.
32BDL3751T 5.8. Custom App Force Restart Custom APP User can set up the application for Customer Source. System can monitor custom APP exist or crash when enable “force restart custom APP”. If custom APP leaved, and boot on source is set to “Custom app”, system will try to lunch 5.8.1.
32BDL3751T File Manager Files are displayed in thumbnail mode. Entry: On the Application page, click the file manager icon to enter the native file manager. 6.1. File Manager Select a file and rename, copy, paste, cut, or delete it. 6.2. Display Switch Files are displayed in list mode.
32BDL3751T Setting UI Important Note: This option is available only when the supported Wi-Fi dongle is plugged. Reboot the device Enter PD settings by clicking “Settings” icon in Admin mode. whenever you plug or remove the USB Wi-Fi dongle. Enable Wi-Fi Enable/disable Wi-Fi connection through main switch in Setting ->...
32BDL3751T 7.1.1.2. Ethernet Settings -> Network & Internet -> Internet -> Ethernet Enable Ethernet Enable/disable Ethernet connection by Setting -> Network & Internet -> Internet-> Ethernet toggle button. Note: 1. Please input IPv4 address in all fields; in dot-decimal notation, consisting of four decimal numbers, each ranges from 0 to 255, separated by dot.
If user does not set a boot animation Settings -> Signage Display, to setup most features of signage file for User mode, the default Philips boot animation will be display. Descript in below sessions. displayed during boot time.
Page 50
“bootanimation.zip” has not been saved by the user before. Monday of every week, then changed other settings Default Philips logo appears during system boot up. in screenshot feature on Friday, the purging day will be changed to Friday (the day of the system’s current When “bootanimation.zip”...
Page 51
Set the repeat mode for auto screenshot. The Countdown timer is a number between 0 and 60. (4). Save to The screen images will be saved in the folder “philips/ Gestures screenshot” of the internal storage. Enable or disable the gesture of swipe up and long press in (5).
32BDL3751T 7.3.2. Server Settings Gmail Security Settings Settings -> Signage Display -> Server Settings If you are using Gmail but cannot sent out E-mail, please check Google Account Security Setting in website: https:// www.google.com/settings/security/lesssecureapps. And turn on “Access for less secure apps”. Open a web browser and login into your Google account.
Page 53
32BDL3751T Step 4 - Create the App Password Click on the "App Password" option to create a new application password: Step 3 - Use your Phone to Complete Configuration Use on-screen instructions and available options to complete 2-Step verification using your phone. Step 5 - Add New App Name First, select a device (for example, Windows Computer) and then click on "Select App"...
32BDL3751T Record the auto-generated app password or simply select it Click the checkbox to enable/disable SFTP server feature. and copy to the clipboard for the later use. After enabling this feature, user can setup account, password and port number. (1). Account: The user name to log into the SFTP server must be between 4 and 20 characters long, and only alphanumeric characters (a-z, A-Z, 0-9) can be used.
32BDL3751T Edit play list opens MediaPlayer playlist compose page. Select App Select a specific APP for custom APP source. If user set up APK for custom app source, it will show APK name. If not, it means that custom App is not configured. Select a specific APP for custom APP source.
SOCKS4, and SOCKS5. Choose one for your proxy server. Use to clear all data under {storage}/philips/ folder in internal and external storage (1). All: Clear philips/ folder in the internal storage and USB. (2). Internal Storage Clear philips/ folder in the internal storage only.
Page 57
Note: If the selected storage (internal storage, USB external storage) does not contain philips/ folder, the system will ( 2 ) create it automatically. All available storage media are listed for user to select. Security Settings -> Signage Display -> System tools -> Security...
Page 58
32BDL3751T External Storage Lock (2). Enter a new password. Click the checkbox to lock or unlock external storage (USB storage). Default is unlocked. Note: (3). Enter the new password again. When you disable external storage lock for enable state, please unplug and plugin external storage again (for USB storage).
PD, all data will then saved into internal storage. The saved path will be: {root directory of USB storage}/ philips/Log/xxBDL3751T-Log-{ yyyy-MM-dd-HH-mm-ss } Or {root directory of internal storage}/ philips/Log/ xxBDL3751T-Log-{ yyyy-MM-dd-HH-mm-ss } If new password again not match new password, you need to try again.
32BDL3751T 7.4. Apps 7.3.7. System updates Upgrade the system from storage. Application information and notification settings for installed application in the system. Local update Settings -> Signage Display -> System updates -> Local update The system will automatically search for “update.zip” or “combofw.zip”...
32BDL3751T 7.5. Display 7.7.3. Device admin apps Settings->Security->More security settings->Device Settings -> Display admin apps List and control installed device admin applications, if installed. 7.5.1. Font size Encryption & credentials Set the system’s default font size. Settings->Security->More security settings-> Encryption & credentials This will display a list of all trusted certs on the device.
32BDL3751T 7.8.1.2. On-Screen keyboard Time zone Let user can set default software IME (Virtual keyboard) and Allow user to choose the time zone. control detail IME settings. The Japanese IME will auto be installed when user select Japanese language in OOBE. 7.8.1.3.
32BDL3751T 2. Model (model name of this device) 3. Android version 4. Up time 5. Build number (release version) 7.9.1. Legal Information Shows the open source licenses, third-party licenses, system WebView licenses and Wallpapers license. 7.9.2. Model Shows the model name of this product. 7.9.3.
32BDL3751T OSD Menu 8.2. OSD Menu Overview An overview of the On-Screen Display (OSD) structure is 8.2.1. Picture menu shown below. You can use it as a reference for further adjustment of your display. Picture Brightness 8.1. Navigating the OSD Menu Contrast Screen Sharpness...
32BDL3751T Zoom mode Press - button to decrease color depth. Note: VIDEO source only Choose one for video input: {Full} / {4:3} / {1:1} / {16:9}/ {21:9}. Noise reduction Full This mode restores the correct Reserved. proportions of pictures transmitted in Gamma selection 16:9 using the full screen display.
32BDL3751T Minimum Volume Boot on source Adjust limitation for the minimum volume setting. Choose to select a source when booting up. • {Input} – Select input source when booting up. Mute • {Playlist} – Select playlist index for Media Player, Browser. Turn the mute function on/off.
32BDL3751T 8.2.5. Configuration2 menu Logo Choose to enable or disable the picture of Logo when turning on your display. Picture OSD turn off The options are: OSD H position • {Off} Screen OSD V position • {On} OSD transparency Audio •...
32BDL3751T 8.2.6. Advanced Option menu Monitor information Show information about your display, including model number, serial number, operating hours and software version. Picture IR control Action Monitor information Keyboard control Action Screen Off timer Model name XXXXXX Serial NO. Audio Date and time Action Operator hours...
Page 69
32BDL3751T Date and time Power-off schedule: Press [ ] or [ ] button to adjust and the display will turn off at the specified Adjust the current date and time for the display’s internal time. clock. Leave the hour and minute options empty if you do Date and time not want to use the function of power-on or power-off schedule.
32BDL3751T OPS settings {Failover}: Failover 1: HDMI1 (default) Set the OPS configuration under each power condition. Failover 2: HDMI1 (default) • {Auto} - After selecting {Card OPS} for video source input, the OPS will be set to off when the display power is set to Failover 3: HDMI1 (default) off, or vice versa.
However, pixel or sub-pixel defects on the PDP / TFT panels used in Plasma- & LCD- displays are sometimes unavoidable. No manufacturer can guarantee that all panels will be free from pixel defects, but Philips guarantees that any Plasma- &...
11.6. Pixel Defect Tolerances In order to qualify for repair due to pixel defects during the warranty period, a PDP / TFT panel in a Philips Plasma / LCD- display must have pixel or sub-pixel defects exceeding the tolerances listed in the following table.
32BDL3751T 12. Cleaning and Troubleshooting 12.1. Cleaning Caution When Using the Display • Do not bring your hands, face or objects close to the ventilation holes of the display. The top of the display is usually very hot due to the high temperature of exhaust air being released through the ventilation holes. Burns or personal injuries may occur if any body parts are brought too close.
32BDL3751T 12.2. Troubleshooting Symptom Possible Cause Remedy No picture is displayed 1. The power cord is disconnected. 1. Plug in the power cord. 2. The main power switch on the back of 2. Make sure that the power switch is the display is not switched on.
Page 77
32BDL3751T How to setup the settings in the menu to Daisy chained by RS232 and no IR cable 1. The first display sets as “Primary” on control all the monitors at the same time OSD (Advanced option/IR control item), and individually via RC? others set as “Secondary”.
32BDL3751T Technical Specifications Item Specifications Screen Size (Active Area) 80 cm / 31.5 inches Aspect Ratio 16:9 Number of pixels 1920 (H) x 1080 (V) Pixel pitch 0.36375(H) x 0.36375 (V) [mm] Displayable colors 8 bits,16.7M colors Brightness (typical) 328 cd/m Contrast ratio (typical) 1200:1 Viewing angle...
Page 79
32BDL3751T General: Item Specifications Power Input 100 - 240V~, 50/60Hz Power Consumption (Max) 87 W Power Consumption (Typ.) 35 W Power Consumption (Standby mode & Off <0.5 W mode) AC Switch Off Mode (W) WiFi+ Bluetooth Function CRD29: Support WiFi 6 and Bluetooth V5.2 Dimensions (Without Stand) [W x H x D] 749.1 mm(W)x443.6 mm(H)x73.5 mm(D_Max)/69.5 mm(D_Wallmount) Weight (Without Stand)
LIMITED WARRANTY In the unlikely event the product requires service, we will arrange for your Philips product to be serviced free-of-charge within the warranty period, provided that the product was used in accordance with the user manual (e.g. in the intended environment).
Page 81
Warranty period for PHILIPS signage display is listed as below, for areas not covered in this table, please follow their warranty statement. Standard warranty period for PHILIPS signage display is listed as below, for areas not covered in this table, please follow the local warranty statement.
Handling the remote control 17 Unpacking 10 Unpacking and Installation 10 Input Mode 70 Input/Output Terminals 16 Warranty policy for Philips Professional Display Solutions Inserting the batteries in the remote control 17 Installation Notes 12 Watch the Connected Video Source 28 IR connection 25...
Page 83
This product has been manufactured by and is sold under the responsibility of Top Victory Investments Ltd., and Top Victory Investments Ltd. is the warrantor in relation to this product. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license.
Need help?
Do you have a question about the 3000 Series and is the answer not in the manual?
Questions and answers