Table of Contents
Advertisement
Lumbar support
* adjustment
You can also adjust the contours of the
backrest to obtain additional support in the
lumbar region.
The upper hips and spinal column receive
supplementary support to help you main-
tain a relaxed, upright sitting position.
Press the front/rear of the switch to
>
strengthen or weaken the curvature
Press the upper/lower end of the switch
>
to strengthen the curvature at the top or
bottom.
Seat, mirror and steering
wheel memory*
You can store and select two different
adjustment settings for the driver's seat,
exterior mirrors and steering wheel.
The adjustment of the lumbar support is not
stored in the memory.
Storing
1.
Turn the ignition key to position 1 or 2
2.
Set the desired seat, exterior mirror and
steering-wheel positions
38
Online Edition for Part No. 01 41 0 157 647 - © 07/03 BMW AG
M
3.
Press the
EMORY button:
The indicator lamp in the button lights
up
4.
Press the desired memory button 1
or 2:
The indicator lamp goes out.
Calling up a stored setting
Do not call up a position from the
memory while the vehicle is moving.
Otherwise there is a risk of accident from
unexpected movement of the seat or steer-
ing
wheel.<
Convenience mode
1.
Open the driver's door after unlocking
or turn the ignition key to position 1
2.
Briefly press the desired memory but-
ton 1 or 2.
The system immediately cancels the
adjustment procedure when you press
one of the seat adjustment buttons or
use one of the memory buttons.
When the respective last driver's seat,
exterior mirror and steering-wheel position
is called up can be set for each key.
Control Center, for principle details, refer to
page 16:
1.
Open the menu
2.
Select "Vehicle settings" and press the
controller
3.
Select "Door locks" and press the con-
troller
4.
Select "Central locking" and press the
controller
5.
Select "Last seat position" and press
the controller
Advertisement
Chapters
Table of Contents
