Table of Contents
Advertisement
6.
Select "Service Status" and press the
controller
7.
Select "Enable services" and press the
controller.
TeleService and, if applicable, BMW
Assist is enabled; data exchange with
the service center starts.
Leave the ignition switched on.
Enabling takes a few minutes. The status is
displayed on the Control Display. If you
open another menu, the enable process
continues to run in the background.
displays the registered services.
Services offered
Automatic Service Notification*
The data on the service status of your vehi-
cle or on legally prescribed inspections is
transmitted automatically directly to your
BMW center prior to the due date.
You can check the current status of the
Automatic Service Notification.
162
Online Edition for Part No. 01 41 0 157 647 - © 07/03 BMW AG
Control Center, for principle details, refer to
page 16:
1.
Open the menu
2.
Select "Service" and press the control-
ler
3.
Select "Service requirements" and
press the controller
4.
Select "Service notification" and press
the controller.
Setting up contact to Roadside
Assistance of the BMW Group
You can contact Roadside Assistance of
the BMW Group should you require help in
the event of a breakdown.
Control Center, for principle details, refer to
page 16:
1.
Open the menu
2.
Select "Service" and press the control-
ler
3.
Select "BMW Service" and press the
controller
4.
Move the controller forwards to change
the field
5.
Select "Roadside Assistance" and
press the controller.
The current vehicle position is dis-
played
Advertisement
Chapters
Table of Contents
