Displaying Vehicle Data - BMW SERIE 5 SPORT WAGON 2004 Owner's Manual

4. Move the controller forward to change
the field
5. Select "Service Status" and press the
controller.
You will be informed about the current
scope of TeleService or BMW Assist.
displays the registered services
6. Select "Update services" and press the
controller.
Roaming
To align the services supported by home
and foreign providers automatically, enable
roaming:
1. Open the menu
2. Select "Communication interface" and
press the controller
3. Select "BMW Service settings" and
press the controller
4. Move the controller forwards to change
the field
5. Select "Profile" and press the controller
6. Select "Roaming" and press the con-
troller. is displayed when roaming
is enabled.
Please note that additional costs can arise
if you are located abroad.
Terminating services
If you terminate the services, your vehicle
will not be equipped to contact the BMW
Assist call center. When an emergency call
is started, the telephone connection to the
general emergency number is established.
Control Center, for principle details, refer to
page 16:
1.
2.
3.
4.
5.
6.
Automatic Service Notification can be dis-
abled separately; consult your BMW cen-
ter.
Enable TeleService and, if applicable BMW
Assist again to re-establish the connection.

Displaying vehicle data

You can obtain a display of some of the
selected data of your individual vehicle.
Control Center, for principle details, refer to
page 16:
1.
2.
3.
4.
5.
Online Edition for Part No. 01 41 0 157 647 - © 07/03 BMW AG
Open the menu
Select "Communication interface" and
press the controller
Select "BMW Service settings" and
press the controller
Move the controller forwards to change
the field
Select "Service Status" and press the
controller
Select "Terminate services" and press
the controller.
TeleService or BMW Assist is disabled
in the vehicle. This does not involve any
contractual termination.
Open the menu
Select "Communication interface" and
press the controller
Select "BMW Service settings" and
press the controller
Move the controller forwards to change
the field
Select "Profile" and press the control-
ler.
165