Seat - BMW R 1200 R CLASSIC Rider's Manual

preferably an authorised BMW
Motorrad dealer.
Commercially available ad-
hesive tape will damage the
plastic lens of the light.
Consult a specialist workshop,
preferably an authorised BMW
Motorrad dealer, in order to avoid
damaging the plastic lens of the
light.
Headlight beam throw and
spring preload
Headlight beam throw is kept
constant when spring preload is
adjusted to suit load.
Consult a specialist work-
shop, preferably an au-
thorised BMW Motorrad dealer,
if you are unsure whether the
headlight beam-throw setting is
correct.

Seat

Remove the seat
Make sure the ground is level
and firm and place the motor-
cycle on its stand.
Turn the key to the right in
seat lock 1 and hold it in this
position while pressing down
the rear part of the seat.
Lift seat 2 at the front and re-
lease the key.
Remove the seat and place it,
upholstered side down, on a
clean surface.
4
53
z