Asc Switched Off; Asc Fault - BMW R 1200 R CLASSIC Rider's Manual

of instability at the rear wheel
3
and has intervened to reduce
torque. The warning light flashes
32
for longer than ASC intervention
lasts. This affords the rider visual
feedback on control intervention
even after the critical situation
has been dealt with.
ASC self-diagnosis not
completed
with Automatic Stability Control
OE
(ASC)
ASC warning light slow-
flashes.
z
Possible cause:
Self-diagnosis did not complete,
so the ASC function is not avail-
able. The engine must be run-
ning and the motorcycle must
reach a speed of at least 5 km/h
in order for ASC self-diagnosis to
complete.
Pull away slowly. Bear in mind
that the ASC function is not
available until self-diagnosis has
completed.

ASC switched off

with Automatic Stability Control
(ASC) OE
ASC warning light shows.
Possible cause:
The rider has switched off the
ASC system.
Activate ASC

ASC fault

with Automatic Stability Control
(ASC) OE
ASC warning light shows.
Possible cause:
The ASC control unit has detec-
ted a fault. The ASC function is
not available.
You can continue to ride. Bear
in mind that the ASC function
is not available. Bear in mind
the more detailed information
on situations that can lead to
an ASC fault ( 71).
Have the fault rectified as
quickly as possible by a
specialist workshop, preferably
an authorised BMW Motorrad
dealer.
Tyre pressure close
to limit of permitted
tolerance
with tyre pressure monitoring
OE
(RDC)
General warning light shows
yellow.
x.x
+ " " (critical pressure)
flashes.