Brake System - BMW R 1200 R CLASSIC Rider's Manual

Hide thumbs Also See for R 1200 R CLASSIC:
Table of Contents

Advertisement

If the oil level is below the MIN
8
mark:
Top up the engine oil (
86
If the oil level is above the MAX
mark:
Have the oil level corrected
by a specialist workshop,
preferably an authorised BMW
Motorrad dealer.
Top up the engine oil
Make sure the ground is level
and firm and place the motor-
z
cycle on its stand.
Wipe the area around the filler
neck clean.
86).
Use the tool from the toolkit to
remove cap 1 from the engine-
oil filler neck.
Damage to the engine
can result if it is operated
without enough oil, but the same
also applies if the oil level is too
high.
Always make sure that the oil
level is correct.
Top up the engine oil to the
specified level.
Engine oil, quantity for
topping up
max 0.5 l (Difference
between MIN and MAX)
Checking engine oil level
(
85).
Install the cap of the engine oil
filler neck, making sure that the
sealing ring is correctly posi-
tioned.

Brake system

Checking operation of
brakes
Pull the handbrake lever.
The pressure point must be
clearly perceptible.
Press the footbrake lever.
The pressure point must be
clearly perceptible.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents