Lenovo 7DJ5 Message Reference page 253

Note: When performing AC reset, after powering off AC, wait for several seconds before powering
on AC. After AC power is restored, power on the host system.
4. If the problem persists, contact technical support.
• FQXPMUP0101I: Start to update LXPM.
Severity: Info
User Action:
Information only; no action is required.
• FQXPMUP0102I: Start to update Window driver.
Severity: Info
User Action:
Information only; no action is required.
• FQXPMUP0103I: Start to update Linux driver.
Severity: Info
User Action:
Information only; no action is required.
• FQXPMUP0104I: Start to update UEFI.
Severity: Info
User Action:
Information only; no action is required.
• FQXPMUP0105I: Start to update BMC.
Severity: Info
User Action:
Information only; no action is required.
• FQXPMUP0106I: Successfully updated the firmware.
Severity: Info
User Action:
Information only; no action is required.
• FQXPMUP0201M: BMC communication failed: EMMC2USB mount failure. Failed to update the
firmware.
Severity: Error
User Action:
1. Restart BMC via supported method and BMC setting via UEFI setup or "Restart Management
Controller" in BMC web UI. Then, reboot the system.
2. If the problem persists, reflash the BMC firmware.
3. If the problem persists, perform AC reset or virtual reseat.
.
Chapter 4 XClarity Provisioning Manager events
249