Processor Settings Screen; Sata Settings Screen - Dell POWERVAULT NX200 Hardware Owner's Manual

Processor Settings Screen

Option
64-bit
Core Speed
Bus Speed
Logical Processor
(Enabled default)
Virtualization Technology
(Enabled default)
Execute Disable
(Enabled default)
Number of Cores per
Processor
(All default)
C States
(Enabled default)
Turbo Mode
(Enabled default)
Processor 1 Family -Model-
Stepping

SATA Settings Screen

Option
SATA Controller
Port A
(Off default)
56
Using the System Setup Program and UEFI Boot Manager
Description
Specifies if the processor supports 64-bit extensions.
Displays the processor clock speed.
Displays the processor bus speed.
On processors that support Simultaneous
Multi-Threading (SMT) technology, each processor core
supports up to two logical processors. If this field is set to
Enabled, the BIOS reports both logical processors. If set
to Disabled, only one logical processor is monitored by
the BIOS.
NOTE:
Disable this feature if your system will not be
running virtualization software.
Enabled permits virtualization software to use the
virtualization technology incorporated in the processor.
Enables or disables execute disable memory protection
technology.
If set to All, the maximum number of cores in the
processor is enabled.
When set to Enabled, the processor(s) can operate in all
available power states.
If Turbo Boost Technology is supported by the processor,
enables or disables Turbo Mode.
Displays the family, model, and stepping of the processor
Description
ATA Mode enables the integrated SATA controller.
Off disables the controller.
Auto enables BIOS support for the device attached to
SATA port A. Off disables BIOS support for the device.