Dell POWERVAULT NX200 Hardware Owner's Manual page 48

Dell personal computer user manual
Hide thumbs Also See for POWERVAULT NX200:
Table of Contents

Advertisement

Table 1-2. System Messages
Message
Unable to launch
System Services
image. System
halted!
Unexpected
interrupt in
protected mode
Unsupported CPU
combination
Unsupported CPU
stepping
detected
Unsupported
DIMM detected.
The following
DIMM has been
disabled: x
Unsupported
memory
configuration.
DIMM mismatch
across slots
detected:
x,x,...
48
About Your System
(continued)
Causes
System halted after
F10 keystroke because
System Services image
is either corrupted in the
system firmware or has
been lost due to system
board replacement.
Improperly seated
memory modules or
faulty keyboard/mouse
controller chip.
Processor is not supported
by the system.
Invalid memory
configuration. The system
will run but with the
specified memory
module disabled.
Invalid memory
configuration. Memory
modules are mismatched
in the specified slots.
Corrective Actions
Restart the system and
update the Unified Server
Configurator repository to
the latest software to restore
full functionality. See the
Unified Server Configurator
user documentation for more
information.
Reseat the memory modules.
See "Troubleshooting System
Memory" on page 137. If the
problem persists, see
"Getting Help" on page 157.
Install a supported processor.
See "Processor" on page 112.
Ensure that the memory
modules are installed in a
valid configuration. See
"General Memory Module
Installation Guidelines" on
page 98.
Ensure that the memory
modules are installed in a
valid configuration. See
"General Memory Module
Installation Guidelines" on
page 98.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents