BMW R 1200 GS Rider's Manual page 125

torque can work loose or their
threads can suffer damage.
Always have the security of the
fasteners checked by a specialist
workshop, preferably an author-
ised BMW Motorrad dealer.
Slip spacing bushing 4 into
the wheel hub on the left-hand
side.
The front wheel must be
installed right way round to
rotate in the correct direction.
Note the direction-of-rotation ar-
rows on the tyre or the wheel
rim.
Roll the front wheel into posi-
tion between the front forks.
Raise the front wheel, insert
quick-release axle 3 and tight-
en to specified torque.
Quick-release axle in axle
holder
50 Nm
Tighten axle clamping screw 2
to the specified torque.
Clamp screw of quick-
release axle
19 Nm
with BMW Motorrad Integral
OE
ABS II
Insert the ABS sensor into its
bore and install screw 1.
Remove the front-wheel stand.
Ease the brake calipers on to
the brake discs.
8
121
z