Additional Functions - BMW MOTORRAD AUDIO SYSTEM Rider's Manual

6
44
Move multi-controller 1 in dir-
ection b and hold it in this po-
SEARCH
sition until
z
on the display.
The audio system searches
for a visible communication
system, the Bluetooth sym-
bol flashes. There is no music
playback while the search is in
progress. One of the following
will appear:
OK
: Connection established,
playback via speakers in hel-
met.
FAILED
: Connection failed,
no communication system
found.
UNABLE
possible, for example because
a helmet with Bluetooth stand-
ard 1.2 was saved beforehand,
or because a connection with
helmet 2 was attempted before
the system had connected to
helmet 1.
If no connection could be estab-
lished:
If there are active Bluetooth
devices in the vicinity, switch
appears
them off.
Delete the devices saved in the
audio system (
Delete the devices saved in the
communication system.
Run the pairing procedure
again.
: Connection not
RESET
).

Additional functions

Rider's helmet with BMW
Motorrad communication
system with Bluetooth
standard 2.0
The volume of the helmet
speakers can be adjusted dir-
ectly using multi-controller 1.
Any change in helmet volume
is shown on the display.
The volume for helmet 2
HELMET 2
( ) cannot be adjusted
by means of the multi-controller.