Volume; Adjusting Input-Signal Level - BMW MOTORRAD AUDIO SYSTEM Rider's Manual

skip to the next track within the
5
selected sequence.
Move multi-controller 1 in dir-
38
ection a and hold to skip ten
tracks forward, or in direction b
and hold to skip ten tracks
back.
ARTISTS
Within the
quence, long-press to skip to
the next album.

Volume

The volume can be set as de-
scribed on page (
In the case of audio devices that
can only be connected to the
system via the jack, the volume
that can be set depends on:
z
the output power of the audio
device
the input-signal level you select
the volume to which the audio
device is set
You should set the input-sig-
nal level and adjust the volume
of the audio device in such a
way that the volume range avail-
able for adjustment corresponds
to that of the other operating
modes.
se-
Adjusting input-signal
level
20).
Press the SET button
repeatedly until
displayed.
Move multi-controller 1 in dir-
ection a or b to adjust the sig-
nal level.
Adjustment options:
Level 1: lowest amplification
2 - 5: intermediate levels
Level 6: highest amplification
AUXVOL
is