Table of Contents
Advertisement
Quick Links
INSTRUCTION
MANUAL
Models: HAWK48WH, HAWK48BK, HAWK48B22WH, HAWK48B22BK,
HAWK56WH, HAWK56BK, HAWK56B22WH, HAWK56B22BK,
CAUTION
Read Instructions carefully
for safe installation and
fan operation
(Fan pictured is for illustration purposes only.
Styles may vary according to the specific models.)
Ceiling Fan Installation Manual, Rev 1.1
HAWK series
• INSTALLATION
• OPERATION
• MAINTENANCE
• WARRANTY
INFORMATION
DIY
MUST BE INSTALLED
BY A LICENSED ELECTRICIAN
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Deka HAWK Series
Summary of Contents for Deka HAWK Series
- Page 1 INSTRUCTION MANUAL (Fan pictured is for illustration purposes only. Styles may vary according to the specific models.) Ceiling Fan Installation Manual, Rev 1.1 HAWK series Models: HAWK48WH, HAWK48BK, HAWK48B22WH, HAWK48B22BK, HAWK56WH, HAWK56BK, HAWK56B22WH, HAWK56B22BK, • INSTALLATION CAUTION • OPERATION Read Instructions carefully MUST BE INSTALLED...
-
Page 2: Safety Precautions
THANK YOU FOR YOUR PURCHASE Thank you for purchasing this quality DEKA ceiling fan. To ensure correct function and safety, please read all instructions before using the product and keep all instructions for future reference. SAFETY PRECAUTIONS 1. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety. -
Page 3: Before Installation
BEFORE INSTALLATION Unpack the fan and carefully identify the parts. Please refer below. HANGSURE FAN: HAWK FAN WITHOUT LIGHT HAWK FAN WITH LIGHT 1. Mounting bracket x1 1. Mounting bracket x1 2. Pre-assembled fan motor, down rod 2. Pre-assembled fan motor, down rod, canopy and canopy x1 and light kit x1 3. -
Page 4: Installing The Mounting Bracket
INSTALLING THE MOUNTING BRACKET • The ceiling fan must be installed in a location so that the blades are a minimum 300mm spacing from the tip of the blade to the nearest objects or walls, including bulkheads and beams. • Secure the hanging bracket to the ceiling joist or structure that is capable of carrying a load of at least 30kg, with the two long screws provided (timber use only). -
Page 5: Blade Installation
BLADE INSTALLATION BLADE ATTACHMENT 1. Align the two mounting blade screws on the blade to the two mounting holes on the fan motor assembly and secure the blade to the fan motor assembly, ensuring they are tightened equally and evenly. Take care not to over tighten as this can damage the blades. 2. -
Page 6: Hanging The Fan
HANGING THE FAN Hangsure Fan: Lift the fan assembly onto the mounting bracket. Ensure the registration slot (A) of the hanger ball is positioned on the stopper (B) of the mounting bracket (C) to prevent the fan from rotating when in operation. ELECTRICAL WIRING DIAGRAM WARNING: For your safety all electrical connections must be undertaken by a licensed electrician. - Page 7 ELECTRICAL WIRING DIAGRAM WIRING DIAGRAM: For installations using wall control only WIRING DIAGRAM: WHEN USING REMOTE CONTROL (Remote sold separately and suitable for HANGSURE model only) A single-pole switch must be placed in the same room as the fan as per local wiring regulations AS/NZS 3000. Please follow the above wiring instructions before installation of remote kit. A remote kit does not substitute for a terminal switch and doing so will void warranty.
-
Page 8: Finishing The Installation
FINISHING THE INSTALLATION Hangsure Fan: Connect the connector plugs together. Cover the mounting bracket with the canopy. Ensure all electrical wiring is tucked inside the canopy and that the wires are not damaged during this step. Secure the canopy to the hanger bracket using the screws provided. Do not overtighten the screws as this will misalign canopy potentially causing sounds. -
Page 9: Using Your Ceiling Fan
USING YOUR CEILING FAN FAN WALL CONTROL (typical installation, plate and light switch not supplied) Turn on the power and check the operation of the fan. • OFF Position – Fan off • 3rd Position – Low fan speed • 2nd Position – Medium fan speed •... -
Page 10: After Installation
AFTER INSTALLATION WOBBLE: Note: Ceiling fans tend to move during operation due to the fact that they are mounted on a rubber grommet. If the fan was mounted rigidly to the ceiling it will cause excessive vibration. Movement of a few centimetres is quite acceptable and does not suggest any problem. -
Page 11: Important Facts
IMPORTANT FACTS All electric motors, including fan motors make some noise and may feel hot if touched – this is NOT A FAULT. Ceiling fans tend to move during operation as they are not generally rigid-mounted.Rigid mounted ceiling fans generate excessive vibration (which leads to noise) and stress on their mountings. Movement in a ceiling fan is not uncommon and does not suggest the fan will fall down. -
Page 12: Warranty Information
This warranty does not cover installation faults, house wiring faults, loose blades or damage of any kind. In areas outside of the coverage of DEKA service agents, DEKA will reimburse a standard fee of $88.00 (inc. GST) for consumers using their own electricians. - Page 13 NOTES...
- Page 14 www.dekafans.com.au...
Need help?
Do you have a question about the HAWK Series and is the answer not in the manual?
Questions and answers