Table of Contents
Advertisement
Quick Links
INSTRUCTION
MANUAL
Styles may vary according to the specific models.
CAUTION
Read Instruction Carefully
For Safe Installation and
Fan Operation
Fan pictured is for illustration purposes only.
Ceiling Fan Installation Manual, Rev 1.0
EVO II series
Models: EVOII36xx, EVOII36LED1xx,
EVOII50xx, EVOII50LED1xx,
EVOII58xx & EVOII58LED1XX
• INSTALLATION
• OPERATION
• MAINTENANCE
• WARRANTY
INFORMATION
1
1
Advertisement
Table of Contents
Related Manuals for Deka EVO II Series
Summary of Contents for Deka EVO II Series
- Page 1 INSTRUCTION MANUAL Fan pictured is for illustration purposes only. Styles may vary according to the specific models. Ceiling Fan Installation Manual, Rev 1.0 EVO II series Models: EVOII36xx, EVOII36LED1xx, EVOII50xx, EVOII50LED1xx, EVOII58xx & EVOII58LED1XX CAUTION • INSTALLATION • OPERATION Read Instruction Carefully •...
-
Page 2: Safety Precautions
Thank you for purchasing this quality Deka ceiling fan. To ensure correct function and safety, please read all instructions before using the product and keep all instructions for future reference. SAFETY PRECAUTIONS 1. In Australia, the appliance is not intended for use by persons (including children) with... -
Page 3: Before Installation
BEFORE INSTALLATION Unpack the fan and carefully identify the parts. Please refer to Fig 1. Fig 1a. Fig 1b. FAN WITHOUT LIGHT (Fig 1a.) FAN WITH LED LIGHT (Fig 1b.) Mounting bracket x 1 Mounting bracket x 1 Pre-assembled fan motor, down rod, Pre-assembled fan motor, down rod, canopy and bottom cover x 1 canopy bottom cover &... -
Page 4: Installing The Mounting Bracket
INSTALLING THE MOUNTING BRACKET • The ceiling fan must be installed in a location so that the blades are a minimum 300mm spacing from the tip of the blade to the nearest objects or walls (Including bulkheads and beams). • Secure the hanging bracket to the ceiling joist or structure that is capable of carrying a load of at least 30kg, with the two long screws provided. -
Page 5: Blade Installation
BLADE INSTALLATION BLADE ATTACHMENT 1. Remove the ceiling fan bottom plate (or the lamp shade) by twisting it anti clockwise. Fig 2. 2. Remove the blade screws (including upper and lower) and keep safe for the following instruction. Fig 3 & Fig 4. 3. -
Page 6: Electrical Wiring Diagram
ELECTRICAL WIRING DIAGRAM WARNING: For your safety all electrical connections must be undertaken by a licensed electrician. NOTE: An additional all pole disconnection must be incorporated in the fixed wiring in accordance with the wiring rules. NOTE: Wiring diagram includes the light kit wiring. The light wiring diagram and switch is omitted when no light kit is used with the ceiling fan. -
Page 7: Finishing The Installation
WIRING DIAGRAM: WHEN USING REMOTE CONTROL (Remote sold separately) A single-pole switch must be placed in the same room as the fan as per local wiring regulations AS/NZ 3000:2018. Please follow the below wiring instructions before installation of remote kit. A remote kit does not substitute for a terminal switch and doing so will void warranty. -
Page 8: Using Your Ceiling Fan
USING YOUR CEILING FAN FAN WALL CONTROL Turn on the power and check the operation of the fan. • OFF Position – Fan off • 3 Position – Low fan speed • 2 Position – Medium fan speed • 1 Position –... - Page 9 REPLACING THE LED DRIVER (For models with light kit) NOTE: Always turn OFF the power at the mains switch before attempting to replace the LED driver. NOTE: LED Driver shall only be replaced by a licensed electrician. Loosen the screw (A) to lift the top housing (B).
- Page 10 CHANGING THE COLOUR OF THE LED LIGHT (For models with light kit) NOTE: Always turn OFF the power at the mains switch before attempting to change the Light output on your ceiling fan. You are able to select/change the colour output of the LED light on your EVO II Ceiling fan.
-
Page 11: After Installation
AFTER INSTALLATION WOBBLE: NOTE: Ceiling fans tend to move during operation due to the fact that they are mounted on a rubber grommet. If the fan was mounted rigidly to the ceiling it will cause excessive vibration. Movement of a few centimetres is quite acceptable and does not suggest any problem. -
Page 12: Important Facts
CEILING RATED RATED POWER RATED POWER FAN MODEL VOLTAGE (MOTOR) (LAMP) EVOII50LED1xx 220 - 240V EVOII58xx 220 - 240V EVOII58LED1xx 220 - 240V IMPORTANT FACTS All electric motors, including fan motors make some noise and may feel hot if touched – this is NOT A FAULT. -
Page 13: Warranty Information
What is an in-home warranty? Deka branded ceiling fans offers a two (2) year in-home parts and labour warranty on ceiling fans installed within the coverage of our network of service agents and in cases where the product fails due to defective materials or workmanship.
Need help?
Do you have a question about the EVO II Series and is the answer not in the manual?
Questions and answers