Clutch; Brakes - BMW HP2 ENDURO Manual

The hour increments by one
each time you press the
button.
Press and hold down
button 1 until the reading
changes.
Minutes reading 3 starts to
flash.
Press button 1.
The minute increments by
one each time you press the
button.
Press and hold down
button 1 until the reading
changes.
The reading stops flashing.
The time is now set.

Clutch

Adjusting clutch lever
If the position of the
clutch fluid reservoir is
changed, air can enter the
clutch system.
Do not twist the handlebar
fitting or the handlebars.
Attempting to adjust the
clutch lever while riding
the motorcycle can lead to
accidents.
Do not attempt to adjust the
clutch lever unless the motor-
cycle is at a standstill.
Turn adjusting screw 1
clockwise.
The adjusting screw is
indexed and is easier
to turn if you push the clutch
lever forward.
Span between handlebar
grip and clutch lever in-
creases.
Turn adjusting screw 1
counter-clockwise.
Span between handlebar
grip and clutch lever de-
creases.

Brakes

Adjusting handbrake
lever
Changing the position of
the brake-fluid reservoir
can allow air to penetrate the
brake system.
Do not twist the handlebar
fitting or the handlebars.
Attempting to adjust the
brake lever while riding
the motorcycle can lead to
accidents.
Do not attempt to adjust the
brake lever unless the motor-
cycle is at a standstill.
4
35
z