BMW HP2 ENDURO Manual page 56

You adjust the rebound-
stage characteristic by turn-
ing adjusting screw 1.
If you want harder damping,
use a screwdriver to turn
the adjusting screw in the +
direction.
If you want softer damping,
use a screwdriver to turn
the adjusting screw in the -
direction.
Basic setting, rebound
stage
Turn adjusting screw as
far as it will go in the "+"
direction, then back it off
15 clicks in the "-" direc-
tion.
Damping effect of the Air
Damping System
The Air Damping System has
two settings so that it can be
adjusted to suit the type of
surface on which you intend
riding.
You can turn the adjusting
screw any distance in either
direction.
Adjusting damping for
rear wheel
Your motorcycle's hand-
ling will suffer if you do
not match the spring-preload
and damping-characteristic
settings.
Adjust the damping
characteristic to suit spring
preload.
Make sure the ground is
level and firm and place the
motorcycle on its stand.
Turn adjusting screw until
marks 1 are horizontal.
4
51
z