exhaust manifold to take its
8
weight.
94
Remove screw 2 for the brack-
z
et of the silencer from the rear
footrest.
Turn the silencer aside; if ap-
plicable position it safely on a
soft rest.
Engage first gear.
Remove studs 1 from the rear
wheel, while supporting the
wheel.
Roll the rear wheel out toward
the rear.
Installing rear wheel
Threaded fasteners not
tightened to the specified
torque can work loose or their
threads can suffer damage.
Always have the security of the
fasteners checked by a specialist
workshop, preferably an author-
ised BMW Motorrad dealer.
Seat the rear wheel on the
rear-wheel adapter.
Tighten screws 1 to specified
torque in diagonally opposite
sequence.
Rear wheel to drive shaft
60 Nm
Turn the silencer to its initial
position.