Table of Contents
Advertisement
ABS self-diagnosis not
completed
with BMW Motorrad ABS
ABS warning light flashes.
Possible cause:
The ABS function is not
available, because self-
diagnosis did not complete. The
motorcycle has to move forward
a few metres for the wheel
sensors to be tested.
Pull away slowly. Bear in mind
that the ABS function is not
available until self-diagnosis has
completed.
ABS fault
with BMW Motorrad ABS
ABS warning light shows.
Possible cause:
The ABS control unit has detec-
ted a fault. The ABS function is
OE
not available.
You can continue to ride. Bear
in mind that the ABS function
is not available. Bear in mind
the more detailed information
on situations that can lead to
an ABS fault (
Have the fault rectified as
quickly as possible by a
specialist workshop, preferably
an authorised BMW Motorrad
dealer.
Tyre pressure close
to limit of permitted
tolerance
with tyre pressure monitoring
OE
OE
(RDC)
General warning light shows
yellow.
+ "
flashes.
Possible cause:
Measured tyre pressure is close
to the limit of permitted toler-
ance.
Correct the tyre pressure as
stated on the inside cover of
the Rider's Manual.
67).
Before you adjust tyre pres-
sure, read the information
on temperature compensation
and adjusting pressure in the
section entitled "Engineering
details".
Tyre pressure outside
permitted tolerance
with tyre pressure monitoring
(RDC)
General warning light
flashes red.
x.x
" (critical pressure)
OE
3
33
z
Advertisement
Table of Contents
