Table of Contents
Advertisement
Remove screw 1.
Pull the glass out of the reflect-
or housing at the threaded-
fastener side.
Turn bulb 2 counter-clockwise
and remove it from the bulb
housing.
Replace the defective bulb.
Do not touch the glass of
new bulbs with your fingers.
Use a clean, dry cloth to hold
the bulbs when handling them.
Dirt deposits, in particular oil and
grease, interfere with heat radi-
ation from the bulb. This leads
to overheating and shortens the
bulb's operating life.
Bulbs for flashing turn
indicators, front
R10W / 12 V / 10 W
with white turn indicators
RY10W / 12 V / 10 W
with LED turn indicators
LED / 12 V
Bulbs for flashing turn
indicators, rear
R10W / 12 V / 10 W
with white turn indicators
RY10W / 12 V / 10 W
with LED turn indicators
LED / 12 V
8
103
OE
OE
z
OE
OE
Advertisement
Table of Contents
