Table of Contents
Advertisement
Pull the bulb housing to the
8
rear to remove.
102
Press bulb 2 into its socket
z
and turn it counter-clockwise to
remove.
Replace the defective bulb.
Do not touch the glass of
new bulbs with your fingers.
Use a clean, dry cloth to hold
the bulbs when handling them.
Dirt deposits, in particular oil and
grease, interfere with heat radi-
ation from the bulb. This leads
to overheating and shortens the
bulb's operating life.
Bulb for tail light/brake
light
P21/5W / 12 V / 5 W / 21 W
Press bulb 2 into its socket
and turn it clockwise to install.
Hold the bulb housing in posi-
tion and install screws 1.
Replacing turn indicator
bulbs, front and rear
Make sure the ground is level
and firm and place the motor-
cycle on its stand.
Switch off the ignition.
Advertisement
Table of Contents
