WeatherTech AlloyCover Installation page 2

At the front of the cover, unhook the storage clips. Unfold the middle
panel toward the tailgate, then unfold the rear panel. Always ensure
the hooks and latches fully engage with the catches and side rails.
To open your WeatherTech AlloyCover after installation, start by
opening the tailgate, then pull the release latch underneath the rear
panel. Fold the panels toward the cab and fasten the storage clips on
both sides of the AlloyCover to secure it.
Please read the owner's manual included with your purchase for
additional important information.
Congratulations. Your WeatherTech AlloyCover is now installed.
For more information or questions installation, please call
1-800-441-6287 or visit www.weathertech.com.