Sharp 14B-SC Operation Manual page 6

Back
Rod antenna (dipole)
Flat ribbon feeder
Antenna mounting hole
Video In/Out Audio In/Out
terminals terminals
Antenna terminal
Power cord
Flat ribbon feeder
Impedance converter
Mounting the rod antenna '
1) Mount the rod antenna (dipole) supplied in
the package by inserting it into the antenna
mounting socket until it clicks.
2) Take out the impedance converter supplied
with the Operation Manual, and connect the
flat ribbon cable to the impedance converter
with a Philips or regular screw driver as shown
in the figure above.
3) Insert the rod antenna plug into the antenna
terminal socket.
CAUTION
Make sure that the power cord is not
plugged in before going out.