Sharp 14B-SC Operation Manual page 11

COVSKIP PRESET MODE OW dN
Mojo Cro Crm
ON SCREEN
Contrast
@® 00008------
——
Increase
| Press
Colour
@ eeeee------
—_—
—_
Increase
| Press
Brightness
1o; 0008------
_ -—>
Decrease Increase
| Press
Tint
<< coeee§§----
—_—_ -—
Purple Green
| Press
Picture-Tone
mPa 00008----- .
<< —— _
Increase
Decrease
Decrease
Decrease
wCHA
- © Additional picture adjustments
5. Press the Preset button again to return to
normal mode. A large, green channel
number will be displayed.
Notes:
1) It is most practical to start this process at
channel number 1, and repeat as needed up
to channel number 39.
2) The TV will return to normal mode if you do
not proceed to the next step within about 10
seconds after pressing the Preset button. If
it does, press the Preset button again to
execute the following step.
3) When the received broadcast signal is weak,
the picture may appear in black and white
only or you may not be able to preset the
channel. In this case, please check the
antenna or consult your appliance store.
(contrast, colour, brightness, tint
<NTSC signals only>, picture-tone)
1. Press the Mode button on the TV or
remote control and select the mode you
wish to adjust.
. Next, use the Volume (/\ ) button or (V)
button on the set, or the Mode ( /\) button
or (V) button on the remote control, to
adjust the mode as you prefer.
Volume (/\) button and (V » |
button on the set or Mode
MODE Button | (".) button and (VV) button on
selected item | the remote control
"VW" Button | "A" Button
CONTRAST To decrease To increase
Oo contrast contrast
COLOUR For less For more
@ colour colour
intensity intensity
BRIGHTNESS | For less For more
é brightness brightness
TINT (NTSC | To shift tint To shift tint
signals only) toward purple | toward green
in al
PICTURE- ) For less For more
TONE sharpness sharpness
mg
The display will disappear after about 6 sec-
onds. Adjust the mode you selected with the
Mode button within this time.