Table of contents 1. Product Overview 2. What’s in the Box FRCA 3. Download the Therabody App 4. Getting to Know the Device 5. Using the Device 6. How the Device Works 7. Care, Cleaning, and Charging 8. Troubleshooting Guide...
Convenient and effective, ThermBack LED revolutionizes how you manage lower back pain. Intended Use The ThermBack LED is intended to provide vibration and topical heating through mechanically powered heat and the infrared spectrum of light to temporarily increase circulation and relieve minor discomfort in the lower back.
Tap “Pair Device” and select “ThermBack LED” to confirm the device and app connection. The Therabody app allows you to easily control and customize treatments from your phone. In the app you can control device settings, learn the best way to use each therapy, and get routine suggestions that show you exactly how to use the device based on your unique needs.
Putting on the Device With a sleek, comfortable design, ThermBack LED can be worn under or over your clothes. For maximum LED light therapy benefits, we recommend wearing it directly on bare skin. Detach the outer compression straps and let them hang down. These come folded and attached to themselves.
Page 6
Using the Device Turn on the device. Firmly press and hold the power button. The LED indicator on the button will turn on when the device is on. Select a heat + far infrared setting. Press the heat button to toggle between the three heat settings: low (default), medium, and high. Far infrared light therapy turns on when the heat setting is on. Heat and far infrared treatment will turn off after 20 minutes.
(Default) *Actual skin temperature may vary depending on how the device is worn. To learn more about the science and benefits behind the modalities included in this device, visit therabody.com/science...
7. Care, Cleaning, and Charging Device Maintenance The following maintenance instructions are important to ensure that your device continues to work as it was designed. Failure to follow these instructions may cause your device to stop working. Cleaning the Device Your device should be cleaned before its first use.
If the heat treatment does not turn on after verifying the above, the heat Heat does not turn on even after connection may be damaged. Contact Therabody for further assistance. Visit Heat function is not working heat button is pressed, heat LED Heat button issue https://www.therabody.com/us/en-us/support/support.html for the available...
Page 10
There may be an adapter issue, The device is charging very slowly charging or the adapter power is too low If the issue still persists, Contact Therabody for further assistance. Visit https:// www.therabody.com/us/en-us/ support/support.html for the available contact methods. Contact Therabody for further assistance.
Page 11
• This device should fit tightly but should NOT restrict circulation in any way Therabody products are designed to unlock the body’s natural ability to achieve health and well-being. • Do not wear this device while sleeping, including during naps Through science and technology, the Therabody portfolio of products allows people to access the therapeutic benefits of different natural phenomena to meet both their needs and preferences.
If the device is damaged or if malfunctions occur, This device is not intended to diagnose, mitigate, or treat diseases. The device is an advanced mechanical contact Therabody Customer service. The warranty will be void if the device, batteries, or charger are...
Page 13
disassembled or if any parts have been removed. Do not use if damaged as these may cause injury. Avoid GARMENT CARE. heavy exposure to dust or sand. Do not puncture or damage the device. Puncturing the device can lead to Meanings of symbols incorrect operation.
Page 14
Guidance and manufacturer´s declaration – electromagnetic immunity The ThermBack LED is intended for use in the electromagnetic environment specified below. The customer or the user of the ThermBack LED should assure that it is used in such an environment. IMMUNITY TEST...
Page 15
P is the The ThermBack LED is intended for use in an electromagnetic environment in which radiated RF disturbances are controlled. The customer or the user of the ThermBack LED can help prevent electromagnetic interference by...
Utilisation prévue ThermBack LED est destiné à fournir des vibrations et un chauffage topique grâce à la chaleur à alimentation mécanique et au spectre infrarouge de la lumière pour améliorer temporairement la circulation et soulager l'inconfort mineur dans le bas du dos.
Page 17
Appuyez sur « Jumeler l'appareil » et sélectionnez « ThermBack LED » pour confirmer la connexion de l'appareil et de l'application. L'application Therabody vous permet de contrôler et de personnaliser facilement les traitements depuis votre téléphone. Dans l'application, vous pouvez contrôler les réglages de l'appareil, apprendre la meilleure façon d'utiliser chaque thérapie, et obtenir des suggestions de routine qui vous montrent exactement comment utiliser l'appareil en fonction de vos...
5. Utilisation de l’appareil Enfiler l'appareil Avec un design élégant et confortable, ThermBack LED peut être porté sous ou sur vos vêtements. Pour un maximum d’avantages de la luminothérapie DEL, nous vous recommandons de le porter directement sur la peau nue.
Durée de traitement prédéfinie sur l’appareil : Découvrez plus d’informations dans l’application Therabody ThermBack LED s’éteindra automatiquement après 20 minutes lorsque vous avez Pour des durées de traitement plus longues et pour contrôler et personnaliser reçu une dose de traitement soutenue par la science.
Page 20
(Par défaut) *La température réelle de la peau peut varier en fonction de la façon dont l'appareil est porté. Pour en savoir plus sur la science et les avantages derrière les modalités incluses dans cet appareil, consultez therabody.com/science...
7. Entretien, nettoyage et chargement Entretien de l'appareil Les directives d'entretien suivantes sont importantes pour vous assurer que votre appareil continue de fonctionner comme il a été conçu. Le non-respect de ces directives peut entraîner l'arrêt du fonctionnement de votre appareil. Nettoyage de l’appareil Votre appareil doit être nettoyé...
Si le traitement par vibration ne s'allume pas après avoir vérifié ce qui précède, La fonction de chauffage ne après avoir appuyé sur le bouton de Problème de bouton de contactez Therabody pour obtenir de l'aide. Contactez Therabody pour obtenir de fonctionne pas chauffage, le voyant lumineux de chauffage l'aide.
Page 23
à l'adaptateur sur la console Impossible de charger l'appareil la prise murale de 100-240 volts. Si cela ne fonctionne pas, contactez Therabody. Visitez https://www.therabody.com/us/en-us/ soutien/soutien.html pour connaître La prise de courant connectée les modes de communication disponibles.
Diabète • Varice Les produits Therabody sont conçus pour libérer la capacité naturelle du corps à atteindre sa santé et • Protubérances ou régions osseuses son bien-être. Grâce à la science et à la technologie, le portefeuille de produits Therabody vous permet •...
Page 25
Lorsque vous utilisez l'appareil, les précautions suivantes doivent toujours être respectées : dysfonctionnement, contactez le service à la clientèle de Therabody. La garantie sera annulée si l’appareil, les batteries ou le chargeur sont démontés ou si des pièces ont été retirées. Ne l'utilisez pas s'il est endommagé, car il peut entraîner 1.
Page 26
l'appareil. La perforation de l’appareil peut entraîner un mauvais fonctionnement. ENTRETIEN DES VÊTEMENTS. 10. INSTRUCTIONS DE NETTOYAGE. Inspectez visuellement l'appareil pour vérifier qu'il n'y a pas de débris qui se Significations des symboles sont accumulés. Essuyez votre appareil avec un chiffon en microfibre humide. Après l'avoir nettoyé, laissez l'appareil sécher complètement avant de le ranger ou de commencer un autre traitement.
Page 27
POUR ÉQUIPEMENT ET SYSTÈMES Conseils et déclaration du fabricant – Immunité électromagnétique Le ThermBack LED est destiné à être utilisé dans l'environnement électromagnétique spécifié ci-dessous. Le client ou l'utilisateur de la ThermBack LED doit s'assurer de l'utiliser dans un tel environnement. TEST D'IMMUNITÉ...
Page 28
(m) peut être L'appareil ThermBack LED est destiné à être utilisé dans un environnement électromagnétique dans lequel les perturbations RF rayonnées sont contrôlées. Le client ou l'utilisateur du ThermBack LED peut aider à prévenir les interférences électromagnétiques en estimée à...
Page 32
Born in Los Angeles, CA. Designed for everybody. @Therabody...
Need help?
Do you have a question about the ThermBack LED and is the answer not in the manual?
Questions and answers