Page 1
4G Solar-powered Traffic Sensing Camera User Manual Datasheet Installation Guide All Software & files can be downloaded from https://www.milesight.com/resources/download-center Install Anywhere, Snap Anytime Milesight...
The Positive Terminal of the Solar Panel Cable needs to be connected to the Negative Terminal of the solar panel, and the Negative Terminal needs to be SIM Card Ejector Tool x 1 connected to the Positive Terminal of the solar panel. www.milesight.com www.milesight.com...
Loosen the screws of Interface Panel and remove the cover. And remove the Solar Charging Interface cover. Step 2: Use the SIM Card Ejector Tool to remove the SIM card tray, and then install the SIM Card and SD Card. www.milesight.com www.milesight.com...
Page 5
8 of this Quick Start Guide. For more detailed image calibration advice, you 2. For installation positioning recommendations, please scan the QR code on the can scan the QR code on the back cover labeled "Installation Guide" to access back cover labeled "Installation Guide" to access the information. the information. www.milesight.com www.milesight.com...
The Wi-Fi of device is automatically enabled when the device is powered on. 2. The indicator light will be red to indicate when the device cannot be started due to low power. www.milesight.com www.milesight.com...
Enter the IP address 192.168.1.1 in the browser to log in to the web page 6. Dimensions of the device and configure the device. Note: SC211 76.5 1. Default Userame/Password: admin/ms123456. 2. The IP address of the device cannot be modified.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator& your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. www.milesight.com...
Need help?
Do you have a question about the SC211 and is the answer not in the manual?
Questions and answers