Page 1
CLEANSLATE CORDLESS SPOT CLEANER (EXCLUDES BATTERY & CHARGER) F18OPSC23O CLEANSLATE PET CORDLESS SPOT CLEANER F18OPSC23K USER GUIDE Product image of overseas model shown. Australian and New Zealand models feature a battery cover.
Only Hoover ONEPWR batteries and chargers should be used with this machine. • Only Hoover ONEPWR recommended tools and accessories should be used with this machine. • Always remove the battery from the machine before carrying out any maintenance or if storing unused for a long period of time.
Page 3
• To reduce the risk of fire and electric shock due to internal component damage, use only Hoover® cleaning solutions intended for use with this appliance. • To assist in reducing drying time, be certain the area is well ventilated.
Page 4
IMPORTANT SAFETY INFORMATION BATTERY SAFETY PRECAUTIONS • Replace the battery with a Hoover ONEPWR battery only. Use of another battery may present a risk of fire or explosion. • Do not attempt to disassemble the battery, remove any component projecting from the battery terminals and do not dispose of in a fire.
Mark DISTRIBUTED BY: Techtronic Industries Australia Pty Ltd 31 Gilby Road, Mount Waverley, VIC 3149, Australia Web Address: www.hoover.com.au Customer Careline: 1300 698 130 Techtronic Industries N.Z. Limited Unit C, 70 Business Parade South, East Tamaki, Auckland 2013, New Zealand Web Address: www.hoover.co.nz...
MACHINE OVERVIEW Carry handle Power On/Off button Boost On/Off button Power indicator Battery dock and cover Clean water/solution tank Dirty water tank Hose Clean water/solution tank handle Wide Path tool Tool release button Hose storage clip Tight Spot tool storage Wide Path tool attachments: A.
GETTING STARTED CHARGING THE BATTERY THIS MACHINE IS ONLY TO BE USED WITH HOOVER ONEPWR BATTERIES AND CHARGERS. PLEASE READ THE BATTERY AND CHARGER USER GUIDES BEFORE USE. NOTE: Before first use, ensure the battery is fully charged. Failure to fully charge the battery before first use may result in poor battery performance.
Not suitable for use on water sensitive flooring/surfaces. Only use with Hoover cleaning solution. Using other solutions may cause excess foaming and damage your machine. The clean water/solution tank should only be filled with warm water (max 40°C).
NOTE: To view the full Hoover® solutions range visit www.hoover.com.au or www.hoover.co.nz OPERATION Press the + button to Pull to remove the wash Press the on/off button to...
Page 10
USING YOUR MACHINE USING THE TOOLS/ATTACHMENTS Select the right tool for the job: Wide Path tool A) Multi-purpose brush attachment for cleaning carpets, rugs, sofas and upholstery. B) Hard floor scrub attachment for cleaning tiles and sealed wooden floors. 2-in-1 tool A smaller cleaning tool to keep messy clean ups separate from every day cleaning.
Page 11
USING YOUR MACHINE USING THE WIDE PATH TOOL (1) OR 2-IN-1 TOOL (2) For spills, always pick up Press the trigger on the Use the brush to agitate any Tilt the nozzle forward so the excess liquid before hose to release water and stubborn stains, scrubbing the nozzle is in contact using water/solution.
CLEANING AND MAINTENANCE EMPTYING AND CLEANING THE DIRTY WATER TANK IMPORTANT: Always switch off the machine and remove the battery before performing maintenance or troubleshooting checks. The dirty water tank is fitted with a float. When the dirty water tank is full, the float will shut off the suction on the machine.
CLEANING AND MAINTENANCE CLEANING THE HOSE IMPORTANT: Clean the hose after each use to remove any debris or water left in the hose. Empty the dirty water tank Holding the cover open, slide Press the tool release Fill a bowl with a maximum into the sink or toilet and the battery into the machine button and pull to remove...
Page 14
CLEANING AND MAINTENANCE WARNING: Always switch off the machine and remove the battery before carrying out any maintenance or troubleshooting. REMOVING AND CLEANING TOOLS/ATTACHMENTS 40°C To remove the nozzle on the Press the tool release Pull and lift the clip to Rinse the tools, attachments wash tool, push and lift the button and pull to remove...
TROUBLESHOOTING There is an accessory missing • Check the contents on the box. Why does the machine have no power? • The battery is not fitted correctly. See Assembly page 8. • The battery has no charge. See Charging the battery page 7. •...
Need help?
Do you have a question about the ONEPWR CLEANSLATE and is the answer not in the manual?
Questions and answers