USING THE BUILT-IN FLASH
Fill Flash
Use fill flash when taking pictures under fluorescent lighting or to
eliminate harsh shadows. When set, the flash will fire every time a
picture is taken. The TTL automatic flash metering system will ensure
correct exposure.
Press the flash-mode button and
turn the control dial until
appears in the data panel.
Flash Cancel
Use flash cancel when photographing twilight scenes or to capture
the ambiance of existing light.
Press the flash-mode button and
turn the control dial until
appears in the data panel.
The shutter speed may be slow.
Use of a tripod is recommended.
26
• Make sure your subject is within the flash
range specified in the table on page 25.
• Press the flash-mode button and turn the
control dial until
appears to return to
autoflash mode.
• For quick shots, hold the flash-mode button
down when pressing the shutter-release
button to fire the fill flash.
• Press the flash-mode button and turn the
control dial until
appears to return to
autoflash mode.
USING THE BUILT-IN FLASH
Red-Eye Reduction
Light reflecting from your subject's eyes may produce the effect
known as red-eye. Use the built-in flash's red-eye-reduction mode
to produce more natural looking photographs by reducing the red-
eye effect.
1. Turn the function dial to
2. Press the function button and
Cancelling Red-eye Reduction
Turn the function dial to
then press the function button
and turn the control dial until
panel.
turn the control dial until
and ON appear in the data
panel.
• Warn your subject that the flash will fire a
few short flash bursts just before the
picture is taken.
and OFF appear in the data
.
,
27