Table of Contents
Advertisement
9222-2163-11 MM-B108 (E).qxd
USING THE BUILT-IN FLASH
Flash Range
The range of the built-in flash depends on the speed of the film and the
selected aperture. Make sure your subject is within the flash range
specified in the table below.
ISO 100
1.0 ~ 3.4m
f/3.5
(3.3 ~ 11.2 ft.)
1.0 ~ 3.0m
f/4.0
(3.3 ~ 9.8 ft.)
1.0 ~ 2.1m
f/5.6
(3.3 ~ 6.9 ft.)
•
Do not use the built-in flash with focal lengths shorter than 28mm. The
built-in flash cannot cover lenses wider than 28mm.
•
Make sure you are at least 1m (3.3 ft.) from your subject when using the
built-in flash.
Lens Shadowing
Lens shadowing occurs when the lens or lens hood blocks part of the
output from the built-in flash. Lens shadowing appears as a semi-circular
shadow area at the bottom (horizontal pictures) or side (vertical pictures)
.
of the image
• Remove the lens hood before using the built-in flash.
• Lens shadowing may occur with the following lenses at the shorter focal
lengths.
AF Zoom 28-70mm f/2.8G
AF Zoom 17-35mm f/3.5G
AF Zoom 28-135mm f/4.0-4.5
AF Zoom 28-85mm f/3.5-4.5
• The built-in flash can not be used with the following lenses:
AF 300mm f/2.8 (APO tele)
AF 600mm f/4.0 (APO tele)
36
01.8.3
16:11
Page 36
ISO400
1.0 ~ 6.8m
(3.3 ~ 22.3 ft.)
1.0 ~ 6.0m
(3.3 ~ 19.7 ft.)
1.0 ~ 4.3m
(3.3 ~ 14.1 ft.)
Fill Flash
Use the fill flash when taking pictures under fluorescent lighting or to
eliminate harsh shadows. When set, the flash will fire every time a
picture is taken.
While pressing the flash-mode
button
until
panel.
• To return to autoflash mode, repeat the
• A shortcut for single shots with fill
Flash Cancel
Use the flash cancel when photographing twilight scenes or to capture
the ambiance of the existing light.
While pressing the flash-mode
button
until
panel.
• The flash will not fire even if the built-in
• To return to autoflash mode, repeat the step above until
•
The shutter speeds will be slow in low-light situations. The use of a tripod
is recommended.
Custom Function Notes
Cust-8: Autoflash will be set in P mode (1), flash cancel will be set in PA mode
(2) or PS mode (3) (p.111).
, turn the control dial
appears on the data
step above until
appears.
flash in autoflash mode can be made.
Hold the flash-mode button down when
pressing the shutter-release button to
fire the fill flash.
, turn the control dial
appears on the data
flash pops-up.
appears.
37
Hide quick links:
Advertisement
Table of Contents
