Dell Dimension C7565 Owner's Manual page 113

2 Locate the 3-pin password jumper (PSWD) on the system board (see page 61), and attach the
jumper plug to pins 2 and 3 to clear the password.
NOTE:
When you receive your computer, the jumper plug is attached to pins 1 and 2.
3 Close the computer cover (see page 99).
4 Connect your computer and monitor to electrical outlets, and turn them on.
5 After the Microsoft
(see page 53).
6 Turn off the monitor and disconnect it from the electrical outlet.
7 Disconnect the computer power cable from the electrical outlet, and press the power button
to ground the system board.
8 Open the computer cover (see page 59).
9 Locate the 3-pin password jumper (PSWD) on the system board (see page 61) and attach the
jumper to pins 1 and 2 to reenable the password feature.
10 Close the computer cover (see page 99).
NOTICE:
To connect a network cable, first plug the cable into the network device and then plug it into
the computer.
11 Connect your computer and devices to electrical outlets, and turn them on.
® ®
Windows desktop appears on your computer, shut down the computer
113
Appendix