Boot Sequence - Dell Dimension C7565 Owner's Manual

POST Behavior
Fastboot
Numlock Key
POST Hotkeys
Keyboard Errors

Boot Sequence

This feature allows you to change the boot sequence for devices.
Option Settings
• Diskette Drive — The computer attempts to boot from the floppy drive. If the floppy disk in
the drive is not bootable, if no floppy disk is in the drive, or if there is no floppy drive installed
in the computer, the computer generates an error message.
• Hard Drive — The computer attempts to boot from the primary hard drive. If no operating
system is on the drive, the computer generates an error message.
• CD Drive — The computer attempts to boot from the CD drive. If no CD is in the drive, or
if the CD has no operating system, the computer generates an error message.
• USB Flash Device — Insert the memory device into a USB port and restart the computer.
When
F12 = Boot Menu
BIOS detects the device and adds the USB flash option to the boot menu.
NOTE:
To boot to a USB device, the device must be bootable. To make sure that your device is bootable,
check the device documentation.
Changing Boot Sequence for the Current Boot
You can use this feature, for example, to restart your computer to a USB device such as a floppy
drive, memory key, or CD-RW drive.
NOTE:
If you are booting to a USB floppy drive, you must first set the floppy drive to OFF in system setup
(see page 105).
1 If you are booting to a USB device, connect the USB device to a USB connector (see
page 103).
2 Turn on (or restart) your computer.
When set to On (default), your computer starts more quickly because it
skips certain configurations and tests.
This option involves the rightmost bank of keys on your keyboard. When set
to On (default), this option activates the numeric and mathematical
features shown at the top of each key. When set to Off, this option activates
the cursor-control functions labeled on the bottom of each key.
This option allows you to specify the function keys to display on the screen
when the computer starts.
This option disables or enables keyboard error reporting when the computer
starts.
appears in the upper-right corner of the screen, press <F12>. The
111
Appendix