Connecting Two Monitors; Connecting Two Monitors With Vga Connectors - Dell Dimension C7565 Owner's Manual

To use the Media Card Reader:
1 Check the media or card to determine the proper orientation for insertion.
2 Slide the media or card into the appropriate slot until it is completely seated in the connector.
If you encounter resistance, do not force the media or card. Check the card orientation and
try again.

Connecting Two Monitors

CAUTION:
located in the Product Information Guide.
NOTICE:
adapter. If you are connecting two flat-panel monitors, at least one of them must have a VGA connector.
If you are connecting a TV, you may connect only one monitor (VGA or DVI) in addition to the TV.
If you purchased a graphics card that supports dual monitors, follow these instructions to connect
and enable your monitors. The instructions tell you how to connect either two monitors (each with
a VGA connector), one monitor with a VGA connector and one monitor with a DVI connector, or
a TV.

Connecting Two Monitors With VGA Connectors

1 Follow the procedures in "Before You Begin" on page 53.
NOTE:
If your computer has integrated video, do not connect either monitor to the integrated video
connector. If the integrated video connector is covered by a cap, do not remove the cap to connect the
monitor or the monitor will not function.
2 Connect one of the monitors to the VGA (blue) connector on the back of the computer.
3 Connect the other monitor to the optional DVI adapter and connect the DVI adapter to the
DVI (white) connector on the back of the computer.
20
Setting Up and Using Your Computer
Before you begin any of the procedures in this section, follow the safety instructions
If you are connecting two monitors that have VGA connectors, you must have the optional DVI