Ieee 1394 Device Problems - Dell Dimension DMC Owner's Manual

• Unintelligible characters print from the printer.
• The mouse pointer does not move or "stutters" when it moves.
• Messages appear stating that the computer is not operating at maximum performance.
• Errors occur and programs crash for no apparent reason.
• Nothing displays on the monitor.
R EMOVE ANY RECENTLY ADDED HARDWARE TO SEE IF IT RESOLVES THE CONFLICT
resolves the conflict, see the hardware documentation for configuration and troubleshooting
instructions. If the problem persists, contact the hardware manufacturer for technical assistance.
C H E C K Y O U R O P E R A T I N G S Y S T E M D O C U M E N T A T I O N F O R A D D I T I O N A L
T R O U B L E S H O O T I N G I N F O R M A T I O N
HECK FOR INTERRUPT REQUEST CONFLICTS
C

IEEE 1394 Device Problems

NOTE:
Check Windows Explorer to see if your device is listed as a drive.
C HECK THE IEEE 1394 DEVICE
connector.
E NSURE THAT THE IEEE 1394
1
Click the Start button.
2
Click Control Panel.
3
Click Printers and Other Hardware.
If your IEEE 1394 device is listed, Windows recognizes the device.
I F YOU HAVE PROBLEMS WITH A
F YOU HAVE PROBLEMS WITH AN
I
manufacturer.
— See page 49.
— Ensure that the IEEE 1394 device is properly inserted into the
INDOWS ®
DEVICE IS RECOGNIZED BY W
D ELL - PROVIDED IEEE 1394 DEVICE
DEVICE NOT PROVIDED BY
IEEE 1394
— If removing the hardware
—
— Contact Dell (see page 90).
ELL — Contact the IEEE 1394 device
D
29
Solving Problems