Printer Problems - Dell Dimension DMC Owner's Manual

F THE POWER LIGHT IS STEADY AMBER
I
power problem might exist.
• Ensure that the microprocessor power cable is securely connected to the system board.
• Remove and then reinstall the memory modules.
• Remove and then reinstall any cards.
• If the problem persists, contact Dell (see page 90).
F THE POWER LIGHT IS BLINKING AMBER
I
• Ensure that the main power cable is securely connected to the system board.
• If the problem persists, contact Dell (see page 90).
E LIMINATE INTERFERENCE — Electrical appliances on the same circuit or operating near the computer
can cause interference. Other causes of interference are:
• Power extension cables
• Keyboard and mouse extension cables
• Too many devices on a power strip
• Multiple power strips connected to the same electrical outlet

Printer Problems

NOTE:
If you need technical assistance for your printer, call the printer's manufacturer. See the printer
documentation for the correct phone number.
HECK THE PRINTER DOCUMENTATION
C
information.
E NSURE THAT THE PRINTER IS TURNED ON
information.
V ERIFY THE PRINTER CABLE CONNECTIONS
• See the printer documentation for cable connection information.
• Ensure that the printer cables are securely connected to the printer and the computer (see
page 11).
T EST THE ELECTRICAL OUTLET
device, such as a lamp.
— The computer is receiving electrical power, but an internal
— A device might be malfunctioning or incorrectly installed.
— See the printer documentation for setup and troubleshooting
— See the printer documentation for power button
—
— Ensure that the electrical outlet is working by testing it with another
33
Solving Problems