Dell Dimension DMC Owner's Manual page 73

securing
screw
Once the drive is in place, apply pressure to ensure that the drive is fully seated.
11
Use the securing screw that came with the drive to attach the drive to the computer.
12
NOTICE:
Match the colored strip on the cable with pin 1 on the drive (pin 1 is marked as "1").
Connect the power cable to the system board.
13
Locate the data cable from the CD or DVD drive in the upper drive bay and connect its
14
middle data connector to the new drive.
Check all cable connections, and then fold the cables out of the way to provide airflow for the
15
fan and cooling vents.
Reattach the front panel to the side hinges, and then rotate it until it snaps onto the front of
16
the computer.
extra alignment
screws (2 or 4)
alignment screws (2)
drive
Adding Parts
73