Displaying And Setting The Clock; Computer Functions - Performance AXIOM Owner's Manual

xiom Series Owner's Manual 3/30/99 11:56 AM Page 1 (2,1)

Displaying and Setting the Clock

Select the clock function by pressing the gray button until the CLK icon is displayed. Press the gray button
for two seconds, until th e clock is displayed an
clock (i.e . 6 PM = 18). Wh en the correct hour is displayed pr
change. When th e corr ect min
CLK setup mode.

Computer Functions

Press the gr ay button to cycle through th
in the upper portion of the screen.
22
6
((1))
CLK: Clock with 24-hour display. See Displaying and Setting the Clock to program the
CLK
clock.
m/h
26
4
ATM: Ride time. This function tim
((1))
stops. When you resume riding, the timer continues timing your ride.
m/h
To r eset the timer to zer
ATM onds. The trip distan
32
DST: Trip distance. This functi
3
((1))
To reset the trip distance to zero, go to DST mode, then press the gray button for
two seconds. The ride tim
m/h
34.76
have selected ATM or TM mode, press the RED button to exit set up mode.
DST
25
4
((1))
ODO: Odometer. This function displays your total distance traveled. See If you are
using kilometer mode... for resetting ODO.
m/h
75
ODO
d the hour begins to change. The Axi
ess the gray button. The minutes will begin to
utes are displayed, press the gray button. On
e functions . In all modes (ex
es your total trip tim . If you stop, the timer
o, g o to ATM mode, then press the gray button for two sec-
ce will also r eset to zero.
on calculates your total trip distan
e will also r eset to zero.between ATM and TM. Once you
om 5.0W has a 24 h
ce completed you will be out o
cept Set Up) curr t speed is displayed en
e
ce.
our
f