Performance AXIOM Owner's Manual page 2

Battery Installation and Replacement
Using a coin or screwdriver, open th
Place the battery into the compartment with the positive side (+) facing up. Replace
the battery cover. When n o battery is in th
for approximately 15 seconds.
For 5.0: Use a screwdriver to remove the battery cover.
Use battery type 2032 (or equivalent) as replacement for the computer.
The 5.0 uses a A76 (or equivalent) battery.
Resetting the Computer
If the display shows irregular numbers, press the AC (Auto Clear) button on the back of the unit.
To clear th e display on th e 5.0, remove and reinstall the battery.
Note: This deletes all stored information.
Trouble Shooting
If the speed display does not appear :
Be sure the magnet and transmitter are properly aligned, and the distance between them is correct.
Cadence model only: If the cadence ( C)does not appear, check that alignment of the cadence magnet and
sensor is correct.
If the display fades :
Check the battery contacts. Replace th
Replacing the Transmitter Battery On Wireless Models
Using a coin, open the transmitter battery cover by twisting counterclockwise. Place the
+
battery into the compartment with th
tery cover.
Use only an alkalin
Use battery type MN21 (23A, 12V) as replacement for the transmitter.
Waterproof
Your computer was designed to be waterproof. But if you do use the computer in the rain, it is
recommend ed to dry it th oughly with a dry cloth, making sure to r
the handlebar mount and drying between the computer and handlebar mount.
e battery cover by twistin g counterclockwise.
e unit, stored informati on will be preserved
e battery if n ecessary.
e positive si e (+) f d
e 23A, 12V battery as r eplacement.
or
acin g up/outwar . Replace the bat- d
em ove th e computer from
Initial Set Up
Your Axiom 5.0W will compute distance and speed functio
battery the kilometer (km/h) and mile (m/h) symbols will
ing units are displayed (i.e. km/h or m/h), press the gra