68
Adding Parts
Press the lever on the retention arm and raise the retention arm.
7
lever
retention arm
filler bracket
If you are installing a new card, remove the filler bracket to create an
8
empty card-slot opening.
If you are replacing a card that is already installed in the computer,
remove the card. If necessary, disconnect any cables connected to the
card. Grasp the card by its top corners, and ease it out of its connector.
Prepare the card for installation.
9
See the documentation that came with the card for information on
configuring the card, making internal connections, or otherwise
customizing it for your computer.
card
edge
connector
card
connector
riser
board
card cage